Samsung DVD-S428K, DVD-S128, DVD-S228 Surround Sound Speaker Setup, Setting Up the Display Options

00015M S128/XSS Eng2 8/7/02 12:05 PM Page 48

Surround Sound Speaker Setup

(DVD-S428K only)

Setting Up the Display Options

1 Press the SETUP button in play or stop mode.

2 Press the UP/DOWN buttons to select Audio Options. Then press the ENTER button.

3 Use the UP/DOWN buttons to select Speaker SETUP. Then press the ENTER button.

4 Use the UP/DOWN or LEFT/RIGHT buttons to select

the desired item. Then press the ENTER button.

Setting up SPEAKER MODE

•If you have connected the system to a speaker with low frequencies of 100Hz or below, select ‘Found (Large illustration)’.

•If you have connected the system to a speaker without low frequencies of 100Hz or below, select ‘Found(Small illustration)’. If you don’t connect a subwoofer, always select ‘Found(Large illustration)’ for the Front Speakers(L/R).

•When you don’t have a particular speaker connected, select ‘Not found (No illustration visible)’.

Setting up DELAY TIME

• When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. You can set Delay Time in the Center/Surround Speaker to customize the sound to the acoustic of your room.

Setting CENTER SPEAKER

•If the distance of Dc is equal to or longer than the distance of Df in the left figure, set the mode as Oms. Otherwise, change the setting according to the table below.

(A)= Df - Dc

Distance of (A)(in) Setting(ms)

0.000

0.341

0.682

1.023

1.364

1.705

Setting SURROUND SPEAKERS

• If the distance of Df is equal to the distance of Ds in the above, set the mode as Oms. Otherwise, change the setting according to the table on the right.

(B) = Df - Ds

Distance of (B)(in) Setting(ms)

0.000

1.023

2.046

3.069

4.0812

5.1015

Setting up TEST

The test output signals come clockwise starting from the Front Speaker(L). Adjust Channel Balance to match to the volume of test

signals memorized in the system.

FRONT(L) CENTER FRONT(R) SUBWOOFER

SURROUND(R) SURROUND(L)

		0		0
1	2	dB	4	ms
		3		5

6 dB0 7

8	0		0	0	12
	9 dB	10ms		11dB

1.Speaker Mode(Front L)

2.Channel Balance(Center)OdB

3.Speaker Mode(Center)

4.Delay Time(Center)Oms

5.Speaker Mode(Front R)

6.Channel Balance(Subwoofer)OdB

7.Speaker Mode(Subwoofer)

8.Speaker Mode(Surround L)

9.Channel Balance(Surround L)OdB

10.Delay Time(Surround L/R)Oms

11.Channel Balance(Surround R)OdB

12.Speaker Mode(Surround R)

ldeal CENTER SPEAKER position

LR

C X

Dc

Df

Sw

Ds

SL

SR

ldeal SURROUND SPEAKER position

NOTE

•How to make the SETUP MENU disappear or return to menu screen during set up. Press RETURN button.

•The subwoofer test output signal is lower than the other speakers.

•The MPEG Multichannel logo is a trademark registered by PHILIPS Corporation.

1 With the unit in Stop mode, press the SETUP button.

2 Use the UP/DOWN buttons to select Display Options. Then press the ENTER button.

3 Use the UP/DOWN buttons to select the desired item. Then press the LEFT/RIGHT buttons.

TV Aspect

Depending on the type of television you have, you may want to adjust the screen setting (aspect ratio).

1. 4:3 Letter Box :

Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.

2. 4:3 Pan-Scan :

Select this for conventional size TVs when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)

3. 16:9 Wide :

You can view the full 16:9 picture on your widescreen TV.

Still Mode

These options will help prevent picture shake in still mode and display small text clearer.

1. Auto : When selecting Auto, Field/Frame mode will be automatically converted.

2. Field : Select this feature when the screen shakes in the Auto mode.

3. Frame : Select this feature when you want to see small letters more clearly in the Auto mode.

Screen Messages

Use to turn on-screen messages On or Off.

Front Display
Adjust the brightness of the unit’s front panel display.
1. Auto Dim : Makes the Front Panel Display dim automatically when
playing a DVD.	SETUPMENU
2. Bright : Makes the Front Panel Display bright.		CHANGING
3. Dim : Makes the Front Panel Display dim.
Black Level
Adjusts the brightness of the screen.(On/Off)

NTSC Disc Output
“NTSC” if the screen only has one NTSC-video entrance. If this is not the	NOTE
case, you can choose to leave “PAL 60Hz” as is.

• How to make the SETUP MENU disappear or return to menu screen during set up; Press the RETURN button.

48 49