Samsung DVD-S124 manual Using the Zoom & 3D Sound Functions, Using the Zoom Function DVD/VCD

Using the Zoom & 3D Sound Functions

Using the Zoom Function (DVD/VCD)

1 During play or pause mode, press the ZOOM button on the remote. A square will be displayed on screen.

2 Use the UP/DOWN or LEFT/RIGHT button to select the part of the screen you want to zoom in on.

3 Press the ENTER button.

-During DVD play, press ENTER to zoom in 2X/4X/2X/Normal in order.

-During VCD play, press ENTER to zoom in 2X/normal in order.

Using the 3D Sound Function

The simulated surround effect depends on the disc contents. If you connect the unit to your stereo system, you can enhance sound quality and produce a greater surround effect. This feature is useful when you are using the DVD player with a two channel stereo through the analog outputs. (Discs which are recorded with LPCM or DTS will not work. When the DIGITAL OUTPUT or MPEG-2 is set to BITSTREAM in the SETUP MENU, the 3D Sound function will not work.)

1	During play, press the 3D button. The 3D
	SOUND mark will be displayed on screen.
	(Be sure the DIGITAL OUTPUT is set to PCM.)
2	Press the UP/DOWN buttons to turn the 3D
	Sound feature on or off.

ADVANCED

FUNCTIONS

NOTE

•3D Sound is possible only on discs recorded using DOLBY SURROUND or DOLBY DIGITAL. However, some of these discs do not contain rear channel sound signals.

•Depending on the disc, the Zoom and 3D Sound function may not work.

37