Using the Zoom & 3D Sound Functions

Using the Zoom Function (DVD/VCD)

1 During play or pause mode, press the ZOOM button on the remote. A square will be displayed on screen.

2 Use the UP/DOWN or LEFT/RIGHT button to select the part of the screen you want to zoom in on.

3 Press the ENTER button.

-During DVD play, press ENTER to zoom in 2X/4X/2X/Normal in order.

-During VCD play, press ENTER to zoom in 2X/normal in order.

Using the Setup Menu

The Setup menu lets you customize your DVD player by allowing you to select various language preferences, set up a parental level, even adjust the player to the type of television screen you have.

1 With the unit in Stop mode, press the SETUP button on the remote.

Player Menu : Setup of the Display Language Use the Player preference menu to select the language for the player’s on-screen displays.

Disc Menu : Setup of the Menu Language

Use the Menu preference menu to select the language you want a

DVD’s disc menu to be displayed in.

Audio : Setup of the Audio Language

Use the Audio preference menu to select the soundtrack language.

Subtitle : Setup of the Subtitle Language

Using the 3D Sound Function

The simulated surround effect (SPATIALIZER N-2-2) depends on the disc contents. If you connect the unit to your stereo system, you can enhance sound quality and produce a greater surround effect. This feature is useful when you are using the DVD player with a two channel stereo through the analog outputs.

(Discs which are recorded with LPCM or DTS will not work. When the DIGITAL OUTPUT is set to BIT

Use the Subtitle preference menu to select the language the disc’s subtitles are to be displayed in.

Parental : Setup of the Parental Level

Allows users to set the level necessary to prevent children from viewing unsuitable movies such as those with violence, adult subject matter, etc.

Audio Options : Setup of the Audio Options

Display Options : Setup of the Display Options

Use to select which type of screen you want to watch and several display options.

STREAM in the SETUP MENU, the 3D Sound function will not work.)

1 During play, press the 3D SOUND button. The 3D SOUND mark will be displayed on screen. (Be sure the DIGITAL OUTPUT is set to PCM.)

2 Press the UP/DOWN buttons to turn the 3D Sound feature on or off.

NOTE

•3D Sound is possible only on discs recorded using DOLBY SURROUND or DOLBY DIGITAL. However, some of these discs do not contain rear channel sound signals.

•Depending on the disc, the Zoom and 3D Sound function may not work.

2 Use the UP/DOWN buttons on the remote to access the different features.

3 Press the ENTER button to access the sub features.

To make the setup screen disappear after setting up, press the SETUP button again.

CHANGING

SETUP MENU

NOTE

Depending on the disc, some Setup Menu selections may not work.