Refferencece, Troubleshooting | Samsung DVD-P260K manual

Changing the Password

1.With the unit in Stop mode, press the MENU button.

2.Press the /❷ buttons to select Setup, then press the ❿ or ENTER button.

3.Press the /❷ buttons to select Parental Setup, then press the ❿ or ENTER button.

PARENTAL SETUP

Note

If you have forgotten your password, see

“Forgot Password” in the Troubleshooting Guide.

Before requesting service (troubleshooting), please check the following.

Problem		Action	Page
	•	Check the batteries in the remote control.
No operations can be		They may need replacing.
No operations can be	•	Operate the remote control at a distance of no more than 20 feet.
performed with the	•		P3
performed with the	•	Remove batteries and hold down one or more buttons for several minutes to drain	P3
remote control.	•
remote control.		the microprocessor inside the remote control to reset it. Reinstall batteries and try

		to operate the remote control again.
Disc does not play.	•	Ensure that the disc is installed with the label side facing up.	P5
	•	Check the region number of the DVD.	P5
	•	Check the region number of the DVD.
	• 5.1 channel sound is reproduced only when the following conditions are met :
		1) The DVD player is connected with the proper Amplifier	P 14

English

4.Press the /❷ button to select Change Password, then press the ❿ or ENTER button. Enter your password (default password). Enter the new password.

PARENTAL SETUP

5.1 channel sound is
not being reproduced.	2) The disc is recorded with 5.1 channel sound.

•Check whether the disc being played has the “5.1 ch” mark on the outside.

•	Check if your audio system is connected and working properly.	P25~26
•
•	In SETUP Menu, is the Audio Output set to Bitstream?

The	icon appears	• The features or action cannot be completed at this time because:
		1. The DVD’s software restricts it.
on screen.

2.The DVD’s software doesn’t support the feature (e.g., angles).

3.The feature is not available at the moment.

4.You’ve requested a title or chapter number or search time that is out of range.

Disc Menu doesn’t appear.	•	Check if the disc has a Menu.

Play mode differs from the	•	Some of the functions selected in the Setup Menu may not work properly if the		P24~28
Setup Menu selection.		disc is not encoded with the corresponding function.		P24~28
Setup Menu selection.


The screen ratio	•	The Screen Ratio is fixed on your DVDs.		P26~27
cannot be changed.	•	The Screen Ratio is fixed on your DVDs.		P26~27
cannot be changed.

No audio.	•	Make sure you have selected the correct Digital Output in the Audio Options		P25~26
		Menu.
The screen is blocked	•	Press the	button (on front panel or remote control) for more than 5 seconds
The screen is blocked		under no disc inside. All settings will revert to the factory settings.		P15
				P15

Forgot password	•	Press the	button (on front panel or remote control) for more than 5 seconds	P27~28
Forgot password		under no disc inside. All settings including the password will revert to the factory		P27~28
		settings. Don't use this unless absolutely necessary.

	•	Go to the contents of the instruction book and find the section that contains the
Other problems.		explanations regarding the current problem, and follow the procedure once again.
Other problems.	•	If the problem still cannot be solved, please contact your nearest authorized ser-
	•
		vice center.

The picture is noisy or	•	Make sure that the disc is not dirty or scratched.		P2
distorted	•	Clean the disc.		P2
distorted	•	Clean the disc.