Samsung DVD-P380 manual Connections, Connecting to a TV Interlace

C O N N E C T I O N S

Connecting to a TV (Interlace)

-Connecting to your TV using Component video cables.

-You will enjoy excelllent quality and accurate color reproduction images. Component video separates the picture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images. (Audio signals are delivered through the audio output.)

1

Using Component video cables (not included), connect the COMPONENT VIDEO OUT jacks on the rear of the DVD player to the COMPONENT IN jacks of your TV.

2

Using the audio cables, connect the AUDIO (red and white) OUT jacks on the rear of the DVD player to the AUDIO (red and white) IN jacks of your TV.

Turn on your DVD player and TV.

3

Set the Video Output to I-SCAN(480i) in the Display Setup menu. (See pages 49 to 50)

4

Press the input selector on your TV remote control until the Component signal from the DVD player appears on the TV screen.

Note

BLUE GREEN

WHITE

RED

RED

Audio Cable

(Included)Component cable (not included)

RED WHITE RED BLUE GREEN

Connections

-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 15 to 16)

-The component jack of your TV may be marked “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “PR, PB, Y” depending on the manufacturer. The number and position of the jacks may vary depending on the TV set. Please refer to the user's manual of your TV.

ENG-13