Samsung DVD-V9800 Using the TV Buttons on the Remote Control, ENG-80, Button Function

VCR O P E R AT I O N S

Chapter 6

REFERENCE

Using the TV Buttons on the Remote Control

Your DVD-VCR remote control will work with Samsung televisions and compatible brands.

To determine whether your television is compatible, follow the instructions below.

1Switch your television on.

2Point the remote control towards the television.

3Hold down the TV button and enter the two-figure code corresponding to the brand of your television, by pressing the appropriate numeric buttons.

	TV Codes
BRAND	CODE
SAMSUNG	01, 14, 15, 23
DAEWOO	19
EMERSON	21
HITACHI	10
LG	06, 08, 18
LOEWE	28
MAGNAVOX	04
NEWSAN	27
NOBLEX	25
PANASONIC	12, 24
RCA	07, 29
SANYO	05, 20
SHARP	02, 16, 22
SONY	03
TELEFUNKEN	26
TOSHIBA	09
ZENITH	17

Note

-If your television is compatible with the remote control, it will switch off. It is now programmed to operate with the remote control.

-If several codes are indicated for your television brand, try each one in turn until you find one that works.

You can then control the television using the following buttons.

Button		Function
POWER		Used to switch the television on and off.
INPUT SEL.		Used to select an external source.
TV VOL + or –		Used to adjust the volume of the television.
TV CH ( or	)	Used to select the required channel.
TV MUTE		Used to toggle the sound on and off.

The various functions will not necessarily work on all televisions. If you encounter problems, operate the television directly.

ENG-80