System Setup
|
| Audio | |
No Disc |
|
|
|
Timer Rec. | Digital Output | : PCM | ► |
Setup | DTS | : Off | ► |
| Dynamic Compression : On | ► | |
MOVE | ENTER | RETURN | EXIT |
|
|
| Audio | |||
No Disc |
|
|
|
|
|
|
Timer Rec. |
|
|
|
|
|
|
| Digital Output |
| : PCM | ► |
| |
Setup |
| DTS |
| : OffBitstream | ► |
|
|
| Dynamic Compression : On | ► | |||
MOVE |
| ENTER | RETURN | EXIT | ||
|
|
|
|
|
|
|
Setting Up the Audio Options
You can connect the
This allows you to setup the audio device and sound status settings depending on the audio system in use.
1.With the unit in Stop mode/No Disc mode, press the MENU button on the remote control.
2.Select Setup using the ▲▼ buttons, then press the ENTER or ► button.
3.Select Audio using the ▲▼ buttons, then press the ENTER or ► button.
4.Select the sub menu(Digital Output, DTS, Dynamic Compression) using the ▲▼ buttons, then press the ENTER or ► button.
Select the item that matches the audio connection you’ve selected on pages 21~23(Method 1, 2 and 3).
Digital Output
•PCM : Converts to PCM(2CH) 48kHz audio.
Select PCM if your amplifier system is stereo and/or Dolby Prologic.
•Bitstream : Outputs Bitstream.
Select Bitstream if your amplifier system supports multi channel digital audio surround decoding such as Dolby Digital and/or DTS.
DVD-Recorder Audio
No Disc
Timer Rec. |
| Digital Output | : PCM | ► | |||
Setup |
| DTS | : | OffOff | ► |
| |
|
| Dynamic Compression : | OnOn | ► |
| ||
MOVE |
| ENTER | RETURN | EXIT | |||
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| Audio | ||||
No Disc |
|
|
|
|
|
|
|
Timer Rec. |
| Digital Output | : PCM | ► | |||
Setup |
| DTS | : Off | ► | |||
|
| Dynamic Compression | OnOff | ► |
|
| |
|
|
|
| On |
|
|
|
MOVE |
| ENTER | RETURN | EXIT | |||
|
|
|
|
|
|
|
|
DTS
•On : Outputs DTS bitstream. (via Digital Audio Output)
Select DTS when connecting to a digital amp with DTS decoder.
•Off : Doesn’t output DTS bitstream.
•When DTS soundtrack is played, sound is not output from Analog Audio Output.
Dynamic Compression
This is only active when a Dolby Digital signal is detected.
•On : When movie soundtracks are played at low volume or from small speakers, the system can apply appropriate compression to make low- level content more intelligible and prevent dramatic passages from getting too loud.
•Off : You can enjoy the movie with standard Dynamic Range.
5.Select the desired item(PCM, Bitstream,
Then press the ENTER or ► button.
English - 32