Special VCR Playback Features Auto Play | Samsung DVD-V85K specification

00090A DVD-V85K/XTC-Eng3 9/17/02 11:36 AM Page 42

Special VCR Playback Features

Auto Play

PLAY

0:00:00 SP

Press the DISPLAY button to see the current status of the VCR deck, as well as the tape counter position and record speed.

While a videotape is playing, you can enjoy a variety of special playback features, including Still, Frame Advance, Skip, Repeat, and more. Press the Play button again to resume normal playback.

1	Still
	From Play mode, press Play/Pause to still a single frame.
2	Frame Advance
	From still mode, press F.ADV/STEP to advance to the next frame.
3	Cue/Review
	From Play mode, press F.Forward ( ) or Rewind ( ) to
	cue/review at two speeds:
	• Picture Search — Press and release to advance the tape
	forward or backward at 5 times normal speed.
	• Jet Search — Press and hold to advance the tape forward or
	backward at 7 times normal speed.

If you want your videotapes to play automatically when you insert them, turn on Auto Play.

NOTE: Only tapes that are missing the Record Safety Tab will play automatically when inserted.

1	Open the “SETUP MENU”
	With the DVD in stop mode, press the SETUP button.
2	Select “VCR”
	Using the up/down and left/right buttons, move the selection arrow
	to “VCR Function Setup,” then press ENTER to select.
3	Select “Auto Play”
	Move the selection arrow to “Auto Play,” then press right to select
	from the following options:
	• On - The VCR will automatically begin playing a video tape
	when it is inserted, as long as the safety tab of the cassette has

MAIN MENU
VCR Function Setup
RETURN	ENTER

been removed.

4	Skip
	From Play mode, press F.ADV/STEPto cue ahead exactly 30
	seconds. Press Skip repeatedly up to 4 times to cue ahead 2
	minutes.
5	Repeat
	From Play mode, press Repeat to review the last 5 seconds of tape
	(SP mode).
6	Shuttle
	From Play mode, Shuttle >> gradually increases the cue speed
	from Double-Speed playback to Picture Search to Jet Search.
	Shuttle << gradually slows down the tape, then goes into Slow
	mode, Still mode, Reverse Picture Search and Reverse Jet Search.

Tracking

	• Off - Auto play is disabled.
4	Tape Length
	Press the left button to select the video cassette length.
	This information is usually printed on the tape box. The menu
	cycles through: T120, T160 or T180. Once the type of cassette is
	set, the VCR can display the amount of time remaining on the tape
	when you press the DISPLAY button.
5	Auto Repeat
	In the VCR FUNCTION SET UP “ Auto Repeat” sets the VCR to
	play a tape repeatedly [unless a tape control is activated (stop, fast
	forward or rewind)].

VCR FUNCTION SETUP
Tape Length	T120	On
Auto Play	On
		Off
Auto Repeat	Off

RETURN

1	1

The Tracking adjustment removes the white lines that sometimes appear during playback because of slight differences in recording decks. The TRK button will automatically align the recorded tracks with the playback heads to solve this problem. You may also set tracking manually.

1Adjust Tracking Manually

During playback, press the TRK ( + or - )buttons to move the white lines out of the picture.

S-VHS Playback

The DVD-VCR allows you to playback high quality S-VHS tapes.

1Insert a S-VHS Tape

Insert an S-VHS tape into the VCR deck.

2Start Playback

Press Play/Pause on the remote control to begin playback of the S-VHS tape.