Samsung BD-EM57C Upgrading Software, Select the IP Mode field, and then set it to Manual

Page 18
KT_WLAN
MAC Address XX:XX:XX:XX:XX:XX
IP Address0.0.0.0
Subnet Mask0.0.0.0
Gateway0.0.0.0
DNS Server0.0.0.0
Network Settings

Settings

ĞĞWireless (General) - Automatic

To setup, follow steps 1 to 3 in "Configuring Your Network Connection" on page 17.

1.Select Wireless (General) in the Network Settings screen, and then press the v button.

The player searches for and then displays a list of the available networks.

Settings

Display

Network Settings

1/11

Audio

Select a Wireless Router to connect.

Network

XXXXX

WEP

 

System

XXXXX

WPA

 

Language

XXXXX

WPA

 

Security

XXXXX

WPA

 

XXXXX

WEP

Refresh

General

Support

a Previous

m Move " Enter

' Return

2.Select the desired network, and then press the v button.

The Security screen appears.

3.On the Security screen, enter your network’s Security Code or Pass Phrase.

Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with an arrow button, and then pressing the v button.

4.When done, select DONE at the bottom of the screen, and then press the v button. The Network Status screen appears. The player verifies the network connection and then connects to the network.

18 English

NOTE

\\ You should be able to find the Security Code or Pass Phrase on one of the set up screens you used to set up your router or modem.

ĞĞWireless (General) - Manual

If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.

After following Steps 1 to 3 in "Configuring Your Network Connection" on page 17.

1.Select Wireless (General) in the Network Settings screen, and then press the v button.

The Network Status screen appears. The player attempts to verify the network connection and fails.

Settings

Display

Audio

Network

System

LanguageCannot connect to the Network. Try the following.

Security- Check security key on Wireless Router, and check if IP is set correctly in 'IP Settings'. - Contact your Internet Service Provider for more information.

General

IP Settings

Retry

OK

 

Support

'Return

 

a Previous

<Move

"Enter

2.Select IP Settings on the bottom of the screen, and then press the v button. The IP Settings screen appears.

3.Select the IP Mode field, and then set it to Manual.

-- For the IP setting values, see "Getting

the IP Settings values" on page 17.

4.Use the number keypad on your remote to enter the Network values. Use the ▲▼◄► buttons on the remote to move from entry field to entry field.

5.When done, highlight OK, and then press the v button.

The Security screen appears.

6.On the Security screen, enter your network’s Security Code or Pass Phrase.

Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with an arrow button, and then pressing the v button.

7.When done, select DONE at the bottom of the screen, and then press the v button. The Network Status screen appears. The player verifies the network connection and then connects to the network.

ĞĞWPS(PBC)

One of the easiest ways to set up the wireless network connection is using the WPS(PBC) function. If your wireless router has a WPS(PBC) button, follow these steps:

1.Open the Home screen.

2.Press the BLUE (D) button on the remote control.

3.Press the WPS(PBC) button on your router within two minutes. Your player automatically acquires all the network settings values it needs and connects to your network. The Network Status screen appears. The player connects to the network after the network connection is verified.

Upgrading Software

The Software Upgrade menu allows you to upgrade the player's software for performance improvements or additional services.

Never turn the player off or back on manually during the update process.

1.In the Home screen, select Settings, and then press the v button.

2.Select Support, and then press the v button.

3.Select Software Upgrade, and then press the v button.

4.Select one of the following methods:

By Internet

By USB

By Disc

By Downoaded

Download in Standby Mode

5.Press the v button.

NOTE

\\ The upgrade is complete when the player turns off, and then turns on again by itself.

\\ Samsung Electronics takes no legal responsibility for player malfunction caused by an unstable Internet connection or consumer negligence during a software upgrade.

\\ If you want to cancel the upgrade while the upgrade software is downloading, press the vbutton.

Image 18
Contents Blu-rayDisc Player Important Safety Instructions Safety InformationPrecautions Class 1 Laser productDisc Storage & Management Handling CautionsCopyright Contents Getting Started Disc and Format CompatibilityLogos of Discs the player can play Region CodeMusic File Support ResolutionSupported Formats Video File Support DTSAvchd Advanced Video Codec High Definition AccessoriesCheck for the supplied accessories below Color is a trademark of Sony CorporationFront Panel Rear PanelRemote Control Tour of the Remote Control Installing batteriesConnecting to a TV ConnectionsConnections Wireless Network Connecting to a Network RouterWired Network Connection can be wired or wirelessAccessing the Settings Screen SettingsInitial Settings Procedure Home ScreenSettings Menu Functions DVDWhen you use the BD-LIVE service 96Khz signalNetwork Settings Etc. by using the Initial Settings functionPIN Networks and the Internet Configuring Your Network ConnectionGetting the IP Settings values WpspbcSelect the IP Mode field, and then set it to Manual IP Settings values onUpgrading Software By USB Download in Standby ModeBy Internet By DiscControlling Video Playback Media PlayInsert a Disc Insert a USB DeviceUsing the Tools Menu Buttons on the Remote Control used for Music PlaybackControlling Music Playback Playing Photo Contents Using Smart Hub Using the AllShare Network FunctionTo Download the AllShare Software Registering a DVD Movie in Disc to Digital Network ServicesUsing Disc to Digital Select Samsung Apps, and then press the v buttonXxxx Playing a Registered Disc to Digital MovieCopy Protection AppendixCompliance and Compatibility Notice Not ALL discs are compatibleNetwork Service Disclaimer LicenseAppendix Additional Information HdmiResolution according to the contents type Digital Output Selection PCMTroubleshooting Problem SolutionRepairs WPA-PSK TKIP/AES SpecificationsWEP OPEN/SHARED WPA2-PSK TKIP/AESLimited Warranty to Original Purchaser Country AK68-02229C-00