audio setup
Speaker Setup
If you have connected this player to an Amp/Receiver or Home theater via the 7.1 channel Analog outputs you need to set the Speaker Options for the best sound.
To setup, follow steps 1 to 3 in "Setting up the Audio Options" on page 36.
4.Press the ▲▼ buttons to select Speaker Setup, then press the ENTER or ▶ button.
5.Press the ▲▼ buttons to select the desired Speaker, then press the ENTER button to change speaker setup.
6.When done, use the ▲▼ buttons to select Save, then press the ENTER button.
If you don’t want to save your settings, use the ▲▼◀▶ buttons to select Cancel, then press the ENTER button.
| System Setup |
Disclaimer | Language Setup |
| |
| Audio Setup |
Setup |
No Disc
Display Setup
HDMI Setup
Network Setup
Parental Setup
| System Setup | PCM Down Sampling : | On |
Disclaimer | Language Setup | Dynamic Compression : | On |
| |||
| Audio Setup | Speaker Setup |
|
Setup |
|
No Disc
Display Setup
HDMI Setup
Network Setup
Parental Setup
Speaker Setup |
| |
Front (L, R) | Large, Small | |
|
| |
Center (C) | Large, Small, None | |
|
| |
Surround (LS, RS) | Large, Small, None | |
|
| |
Subwoofer (LFE) | On, Off | |
|
| |
Surround Back | Large, Small, None | |
(LSB, RSB) | ||
| ||
|
|
Speaker
~Large : Delivers full bandwidth sound with bass below 100 Hz.
|
|
| PCM Down Sampling | : | On | ||
Disclaimer | Language Setup | Dynamic Compression : | On | ||||
Speaker Setup |
|
|
|
|
|
| |
Setup | Audio Setup | Speaker Setup |
|
|
| ||
No Disc |
|
| Front | : | Small |
|
|
|
|
|
|
| |||
| Display Setup | LFE | : | On |
|
| |
| Network Setup | Center | : | Small |
|
| |
| Surround | : | Small |
|
| ||
| Parental Setup |
|
| ||||
| Surround Back : | Small |
|
| |||
|
|
| Save | Cancel |
|
| |
a Test Tone | s Select | r Return |
|
|
~Small : If LFE is on, bass below 100 Hz will be outputted through a Subwoofer instead of the speakers. If LFE is off and the Front Speaker is set to Large, sound will be outputted through the Front Speaker.
~None : Select to disable the speakers.
Subwoofer Speaker
~On : Select to use the subwoofer speaker.
~Off : Select to disable the subwoofer speaker.
(This option can only be selected when the Front (L+R) speakers are set to Large.)
Press the RED(A) button
~A test tone will be sent to L ; C ; R ; RS ; RSB ; LSB ; LS ; LFE in order so you can make sure the speakers are set up correctly.
~To end the test tone, press the RED (A) button again.
~The test tone can only be activated when no discs are in the unit.
~The test tone outputs through the 7.1 channel analog outputs only.
M ` Press the RETURN to return to the previous menu.