Setting the Clock
For each step, you have a few seconds to set the required option. If you exceed this time, you must start again.
1.Switch the system on by pressing the POWER button.
2.Press and hold the TIMER/CLOCK button and then press the ENTER button.
Result: "CLOCK" is displayed.
3.Press ENTER.
Result: The hour flashes.
Decrease the hours: ◄
Increase the hours: ►
4.When the correct hour is displayed, press
ENTER.
Result: The minutes flashes.
Decrease the minutes: ◄
Increase the minutes: ►
5.When the correct minute is displayed, press
ENTER.
Result: " 
TIME" appears in the display.
The current time is now set.
✎NOTE
You can display the time, even when you are using another function, by pressing and holding the TIMER/CLOCK button once.
You can also use # or $ on the front panel instead of buttons in steps 3 and 4.
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| 04 | ||
|
|
|
|
|
|
|
|
|
|
| Basic | ||
Timer Function | |||||||||||||
|
| ||||||||||||
| Before setting the timer, check that the current time | Functions | |||||||||||
The timer enables you to switch the system on or off |
|
| |||||||||||
at specific times automatically. |
|
| |||||||||||
| is correct. |
|
| ||||||||||
| For each step, you have a few seconds to set the required |
|
| ||||||||||
| option. If you exceed this time, you must start again. |
|
| ||||||||||
| If you no longer want the system to be switched on |
|
| ||||||||||
| or off automatically, you must cancel the timer. |
|
| ||||||||||
Example: You wish to wake up to music every morning.
1.Switch the system on by pressing the POWER button.
2.Press and hold the TIMER/CLOCK button and
then press ◄ or ► buttons until 
TIME is displayed.
3. Press the ENTER ( 
) button.
Result: ON is displayed for a few seconds. You can set the timer
4.Set the timer switch-on time.
aPress the ◄ or ► button.
b Press the ENTER ( 
) button. Result: The minutes flash.
cPress the ◄ or ► button.
d Press the ENTER ( 
) button.
Result: OFF is displayed for a few seconds. You can now set the timer
5.Set the timer switch-off time.
aPress the ◄ or ► button.
b Press the ENTER ( 
) button. Result: The minutes flash.
cPress the ◄ or ► button.
d Press the ENTER ( 
) button.
Result: VOL XX is displayed, where XX corresponds to the volume already set.
6.Press ◄ or ► button to adjust the volume level
and press the ENTER ( 
) button.
Result: The source to be selected is displayed.
7.Press the ◄ or ► button to select the desired source to be played when the system switches on.
FM (radio) : a Press the ENTER ( |
|
| ) button. |
|
|
bSelect a preset station by pressing the ◄ or ► button.
DVD/CD (compact disc): Load one compact disc.
USB : Connect the USB device.
English 31
31 | 8:45:23 |