Appendix: Manual Network Configuration
g. Turn the TUNE Knob to highlight Wired.. |
|
|
|
| |
|
| Connection type | 1/9 | ||
|
| ||||
|
| ||||
|
| ||||
Press the TUNE Knob.. |
|
|
|
| |
Wired | > | ||||
h. Will you be using DHCP? Turn the TUNE | Wireless | > | |||
|
|
|
| ||
Knob to highlight DHCP enable or DHCP |
|
|
|
| |
disable and press the TUNE Knob.. |
|
|
|
|
i.If you have selected DHCP disable, enter
the following information.. Otherwise, continue with step j..
For each entry, Turn the TUNE knob to select the numbers, and press the TUNE knob to confirm and move to the next number.. Press BACK if you entered an incorrect number..
TIP! You can use the Remote Control to increment the numbers (), and move forward or backward through the number fields ( + and
i.Enter the IP address to use for the Radio..
ii.Enter the Subnet Mask IP address for the network..
iii.Enter the Gateway IP address for the network..
iv.Enter the Primary DNS IP address for the network..
v.Enter the Secondary DNS IP address for the network, or leave blank if there is none..
IP settings
IP address
0 . 0 . 0 . 0 Subnet mask
255 . 255 . 255 . 0
j.If you have entered the correct information, and the Radio is able to connect to your network, the Connected screen will be displayed.. If not, the Failed to connect screen is displayed.. This means that one or
72