Samsung CL-21M40MQ manual Connecting a VCR, Unplug the cable or antenna from the back of the TV

Page 13

I N S TA L L AT I O N

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 9-12). Skip step 1 if you have not yet connected to an antenna or a cable system.

1

Unplug the cable or antenna from the back of the TV.

	2	VCR Rear Panel
	Connect the cable or
	antenna to the	Incoming
	ANTENNA IN terminal on	Incoming
	ANTENNA IN terminal on	Cable or
	the back of the VCR.	Antenna
	3	VCR Rear Panel

Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV.

TV Rear Panel

Coaxial Cable

A coaxial cable is usually included with a VCR. (If not, check your local electronics store).

4

Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the AUDIO jacks on the TV.

5

Connect a video cable between the VIDEO OUT jack on the VCR and the VIDEO jack on the TV.

VCR Rear Panel

TV Rear Panel

Audio Cable

VCR Rear Panel	TV Rear Panel
VCR Rear Panel
	Video Cable

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

Note: This figure shows the Standard connector-jack panel. The actual configuration for your TV may be different.

English - 13

Image 13

Contents Owner’s Instructions Your New TV InstallationOperation Troubleshooting Special FeaturesAppendix Accessories List of FeaturesStand by indicator Remote Control SensorFamiliarizing Yourself with The TV Control ButtonsAudio Input Connection Jacks SideVideo Input HeadphoneAudio-Video Output jacks Connection Jacks RearVideo Input jacks Component Video Input jacks Y, PB, PRNumber buttons Remote ControlVOL +, VOL $ CH , CHAntennas with 300-ohm Flat Twin Leads Connecting VHF and UHF Antennas Antennas with 75-ohm Round Leads Connecting Cable TV Separate VHF and UHF Antennas Cable without a Cable BoxConnecting to a Cable Box that Descrambles Some Channels Connecting to a Cable Box that Descrambles All ChannelsCable Box Switch Unplug the cable or antenna from the back of the TV Connecting a VCRConnect the cable or Antenna to Antenna in terminal onConnecting a Second VCR to Record from the TV Connecting a DVD PlayerConnecting a Camcorder Installing Batteries in the Remote Control Turning the TV On and Off Press the Power button on the remote controlViewing the Menus and On-Screen Displays Viewing the MenusPress the Menu button to display the menu Selecting a Menu LanguagePress the Exit button to exit Memorizing the Channels Selecting the Video Signal SourceTV automatically cycles Storing Channels in Memory Automatic MethodAdding and Erasing Channels Manual Method Using the Button Using the Channel ButtonsUsing the PRE-CH Button to select the Previous Channel Changing ChannelsCustomizing the Picture Press the Menu button to display menu Using Automatic Picture SettingsUsing the Mute Button Adjusting the VolumeCustomizing the Sound Press the œ or √ button Using Automatic Sound SettingsTo increase or decrease the value of a particular item Then press the œ or √Press the Menu button to display the on-screen menu Setting the ClockPress the √ button again the hours digits will be selected Alternate method Viewing a VCR or Camcorder TapePress the œ and √ buttons to adjust the fine tuning Fine Tuning ChannelsButton to select Select Selecting the Color Tone Changing the Screen Size Using the Surf Feature Text at the bottom Choosing a Multi-Channel Sound MTS SoundtrackAuto Volume Extra Sound SettingsSetting the On/Off Timer When finished, press √ button Setting the Sleep TimerOr button will Alternate between on OffMisspellings and unusual characters Viewing Closed CaptionsChapter Five Identifying ProblemsUsing Your TV in Another Country Cleaning and Maintaining Your TVSpecifications This page is intentionally Left blank This page is intentionally Left blank This page is intentionally Left blank Page Country Customer Care Center Web Site Contact Samsung WORLD-WIDE