Samsung 5500 user manual Network Connection, Entere

Page 12

Network Connection

You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless connection.

Network Connection - Wireless

You can connect your TV to your LAN through a standard wireless router or modem. To connect wirelessly, you must first attach a Samsung Wireless LAN Adapter (WIS09ABGN, WIS09ABGN2, WIS10ABGN - sold separately) to either the USB port on the back of your TV. See the illustration below.

 

Wireless IP Sharer

 

(wireless router having

The LAN Port on the Wall

DHCP Server)

 

 

Samsung Wireless

 

LAN Adapter

 

LAN Cable

 

TV Side Panel

Samsung’s Wireless LAN adapter supports the IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, and IEEE 802.11n wireless communication protocols. For your TV to connect to your network, the wireless router or modem you use must also support one of these protocols. The fastest of these protocols is IEEE 802.11n.

Most wireless network systems incorporate a security system that requires devices that access the network through an access point or wireless router (typically a wireless modem or router) to transmit an encrypted security code called an access key.

For regular connections, your TV is compatible with the following security protocols:

Authentication Mode: OPEN, SHARED, WPAPSK, WPA2PSK

Encryption Type: WEP, TKIP, AES

Configuring the Network Connection - Wireless

The instructions below are for networks that use the Dynamic Host Configuration Protocol (DHCP) to configure network connections automatically. If your have a Static IP network, see your user’s manual for configuration instructions.

To configure your network connection for a network that uses DHCP, follow these steps:

1.Connect your TV to your network as shown in the illustrations above.

2.Turn on your TV, press the MENU button on your remote, and then select Network → Network Settings.

3.Select Wireless (General), and then press ENTERE twice.

4.The Network function searches for available wireless network. When done, it displays a list of the available networks.

5.In the list of networks, press the ▲ or ▼ button to select a network, then select Next and press ENTERE.

6.If you have selected an wireless router that has security, the security key screen appears. Enter the Security key (Security key or PIN), then select Next, and press

ENTERE.

Network Settings

Select a network connection type.

Wired

 

Wireless

 

(General)

Set up wireless network by selecting your Wireless

WPS(PBC)

Router. You may need to enter security key depending

One Foot

on the setting of the Wireless Router.

Connection

 

 

UMove EEnter RReturn

When you enter the Security key (Security key or

PIN), use ▲/▼/◄/► buttons on your remote to select numbers and characters. You can also use the number keys on the remote to enter numbers directly.

7.The network connection screen appears and verifies the network connection. When the connection has been verified, the “Internet is connected successfully.” message appears.

For more detailed information, see “Connecting to a Wireless Network” in the e-Manual.

If you want to set the connection manually, select IP Settings on the network connection screen. Set IP Mode to Manual. You must enter the IP Address, Subnet Mask, Gateway, and DNS Server manually.

English - 12

Image 12
Contents Samsung Samsung Electronics Canada Inc., Customer 4B2 CanadaSamsung Road Ridgefield Park, NJSecuring the Installation Space Installation with a stand Installation with a wall-mountStill image warning Other WarningsAccessories Viewing the Control PanelSource E MenuInstall the Stand Stand depending on the model Guide StandInsert the Stand Guide into the slot of TV bottom side Make sure that at least two persons lift and move the TVInstalling the Wall Mount Wall or Ceiling MountingTV size Vesa scew hole Remote Control Buttons Xx The color and shape may vary depending on the modelHow to Navigate Menus Connecting to an Antenna or Cable ConnectionEnter E Plug & Play Initial Setup Connecting to an AV Device Hdmi in 1 DVI, 2, 3, 4, PC/DVI AudioConnecting to an Audio Device Connecting to a PCUsing an Hdmi cable or Hdmi to DVI cable or a D-sub cable Digital Audio OUT OpticalConnector for service only Changing the Input SourceNetwork Connection EntereSelect Wired How to view the e-Manual MethodViewing the Contents Magnified screen by using / buttonsNext page, press the / button E-MANUAL buttonTroubleshooting License List of FeaturesSolutions and Explanations Securing the TV to the Wall TV-Holder Kit Sold SeparatelyAssembling the Holder-Wire stand Storage and Maintenance SpecificationsDimensions Front view / Side viewJack panel detail / Rear view Samsung Electronics America, Inc