SWL (Samsung Wireless Link)
This function lets you connect your TV to a Samsung device (router, etc.) that supports PBC (WPS) . You can connect the TV to the device even if a sharer is not connected to the TV.
✎✎For the TV to use Internet@TV, the AP (access point) must be connected to the wireless network.
✎✎If a Samsung Wireless LAN Adapter is connected to the USB 2 port, the network may not operate normally. We recommend connecting it to the USB 1 (HDD) port.
✎✎Only sharers using the 2.4 Ghz band are supported. Sharers using the 5 Ghz band are not supported.
SWL connect
You can directly connect the TV to a Samsung device that supports PBC (WPS).
✎✎This function is available when SWL (Samsung Wireless Link) is set to On.
✎✎To use the SWL (Samsung Wireless Link) function, connect the Samsung Wireless LAN Adpater to the USB 1 (HDD) port.
How to connect using Samsung Wireless Link
To connect using Samsung Wireless Link, follow these steps:
1.Follow Steps 1 through 5 in the “How to set up using PBC (WPS)” (p. 29).
2.Select SWL (Samsung Wireless Link) by using the ▼ button, and then press the ENTEREbutton to turn it On.
3.Select SWL connect by using the ▼ button and then press the ENTEREbutton.
4.If the “Press the PBC button on the PBC(WPS) supported device to connect within 120 seconds.” message appears, press the PBC button on the device
to connect.
✎✎ For more information, refer to the wireless network setup manual of the device to be connected.
5.If the TV connects properly to the device after the count in the message box starts, then the message box
disappears automatically.
✎✎ If the connection fails, please retry after 2 minutes.
If Your TV Fails to Connect to the Internet
Your TV may not be able to connect to the Internet because your ISP has permanently registered the MAC address (a unique identifying number) of your PC or modem, which it then authenticates each time you connect to the Internet as a way of preventing unauthorized access. As your TV has a different MAC address, your ISP can not authenticate its MAC address, and your TV can not connect.
To resolve this problem, ask your ISP about the procedures required to connect devices other than a PC (such as your TV) to the Internet.
If your Internet service provider requires an ID or password to connect to the Internet, your TV may not be able to connect to the Internet. If this is the case, you must enter your ID or password when connecting to the Internet.
The internet connection may fail because of a firewall problem. If this is the case, contact your Internet service provider.
If you cannot connect to the Internet even after you have followed the procedures of your Internet service provider, please contact Samsung Electronics at