Operation
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently:
1Press the POWER button on the remote control. The message Start Plug & Play is displayed.
Press the ENTER button, then the Language menu is displayed.
2Press the ▲ or ▼ button to select the desired language, then press the ENTER button. The message Select Home Mode when installing this TV at home. is displayed.
Plug & Play
Start Plug & Play
OK
Enter 
Exit
3Press the ◄ or ► button to select Shop or Home, then press the ENTER button. The Check antenna input. menu is displayed.
➢ The default selection is Home.
We recommend setting the TV to Home mode for the best picture in your home environment.
Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode, press the Volune button and then hold down the MENU button for five seconds on the TV panel.
4Make sure that an antenna is connected to the TV.
Press the ENTER button, then the Antenna menu is displayed.
5Press the ▲ or ▼ button to select the desired connection.
Press the ENTER button to memorize the channels of the selected connection.
6Press the ENTER button to start.
First analog, then digital channels will be memorized.
When selecting Cable TV:
7Press the ▲ or ▼ button to select Cable, then press the ENTER button. The Cable System menu is displayed.
8Press the ▲/▼/◄/► buttons to select the cable system for analog and digital channels respectively, then press the ENTER button.
9Press the ENTER button to start. The TV begins memorizing all available channels. Press the ENTER button to stop.
After all available channels are stored, the Clock Set menu is displayed.
➢When you select Cable or Air+Cable, it also executes “Clearing Scrambled Channels” simultaneously. See page 15.
10Press the ◄ or ► button to move to the hour or minute.
Set the clock by pressing the ▲ or ▼ button, then press the ENTER button.
Plug & Play
Language
English
Español
Français
Move 
Enter 
Skip
Plug & Play
Select Home Mode when installing this TV at home.
Shop Home
Move 
Enter 
Skip
Plug & Play
Auto Program
Air
Cable
Air+Cable
Move 
Enter 
Skip
Plug & Play
Auto Program |
| Start |
Cable System |
| |
|
| |
Analog |
|
|
Digital STD | HRC | IRC |
STD | HRC | IRC |
Move | Enter | Skip |
11The message Enjoy your watching. is displayed. When you have finished, press the ENTER button.
➢Even if the ENTER button is not pressed, the message will automatically disappear after several seconds.
If you want to reset this feature...
1Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
2Press the ENTER button to select Plug & Play.
For further details on setting up options, refer to the top of this page. ➢ The Plug & Play feature is only available in TV and DTV mode.
Plug & Play
Auto Program in progress
STD 120 | 3% |
| Stop |
Enter | Skip |
Scrambled Channels Searched
Plug & Play
Clock Set | |
Move | Enter |
| Skip |
Enjoy your watching.
OK
English - 9