![](/images/new-backgrounds/1278719/27871921x1.webp)
Y O U R N E W T V
Connection Jacks (Rear)
Use the rear panel jacks to connect an A/V component that will be connected continuously, such as a VCR or a DVD player.
For more information on connecting equipment, see pages 14 – 24.
ŒS-Video Input jack
Connect to
´Video Input jacks
Connect to the video output jacks of VCRs, DVD players and similar devices.
ˆComponent Input jacks (Y, PB, PR, AUDIO-L/R)
Connect to the Component audio and video outputs of a DVD or DTV
•The Y Component video 1 and 2 input jacks also function as the regular (composite) video 2 and 3 input jacks.
ˇAudio Input jacks
Connect to the audio output jacks of VCRs, DVD players and similar devices.
•The component audio 1 and 2 input jacks also function as the audio 2 and 3 input jacks for regular (composite) video.
¨Audio-Video Output jacks
Connect to the audio/video input jacks of a recording VCR.
ØUPGRADE PORT
For service only
∏HDMI (High Definition Multimedia Interface)
Input jack
Connect to the HDMI jack for device with HDMI output.
”Digital Audio Output jack (OPTICAL)
Connect to a Digital Audio component.
’ANTENNA terminals
Two independent cables or antennas can be connected to these terminals. Use “ANT 1 IN (Air)” and “ANT 2 IN (Cable)” terminals to receive a signal from VHF/UHF antennas or your cable system.