Samsung TXM 2792F, TXL 2767 manual Connecting to a Cable Box that Descrambles All Channels

Page 16

I N S T A L L AT I O N

Connecting to a Cable Box that Descrambles All Channels

1

Find the cable that is con- nected to the ANTENNA OUT terminal on your cable box.

2

Connect the other end of this cable to the VHF/UHF antenna terminal on the back of the TV.

▼ This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of coaxial cable. (These items are available at most electronics stores.)

1

Find and disconnect the cable that is connected to the ANTENNA IN terminal on your cable box.

▼	This terminal might be labeled

“ANT IN”, “VHF IN” or simply, “IN”.

2

Connect this cable to a two-way splitter.

3

Connect a coaxial cable between an OUTPUT ter- minal on the splitter and the IN terminal on the cable box.

2.3 CHAPTER TWO: INSTALLATION

Image 16

Contents Owner’s Instructions AA68-02477B-00 ENGRisk of Electric Shock Do not Open Thank You for Choosing Samsung Example Antenna Grounding Safety Your New TV InstallationOperation Special Features TroubleshootingList of Features Chapter OneFamiliarizing Yourself with The TV Video Input Side Panel JacksSimilar devices Rear Panel Jacks Audio InputsRemote Control ´ Number buttons+100 SizeRemote Control ˜ VCR Controls ¯ PIP Controls Not availableConnecting VHF and UHF Antennas Antennas with 300-ohm Flat Twin LeadsConnecting Cable TV Antennas with 75-ohm Round LeadsSeparate VHF and UHF Antennas Cable without a Cable BoxConnecting to a Cable Box that Descrambles Some Channels Connecting to a Cable Box that Descrambles All ChannelsConnect this cable to a two-way splitter Connecting a VCR Unplug the cable or antenna from the back of the TVInstall AT I O N Connecting an S-VHS VCR Connect an S-video cable between Video OUT jack on the VCRConnecting a DVD Player Connecting a Second VCR to Record from the TVConnecting a Camcorder Installing Batteries in the Remote Control Plug & Play Feature Press the Power button on the remote controlTurning the TV On and Off Message Plug & Play is displayedIf you want to reset this Feature Viewing the Menus Viewing the Menus and On-Screen DisplaysViewing the Display Selecting a Menu Language Press Menu twice to exitSelecting the Video Signal-source Memorizing the ChannelsPress CH two times to ANT antennaStoring Channels in Memory Automatic Method Press the CH button to select Auto programAdding and Erasing Channels Manual Method Press the VOL+ or VOL- button to select Added or ErasedAdjusting the Volume Changing ChannelsLabeling in the A/V mode Labeling the ChannelsSetting the Clock Press the Menu button to display the on-screen menuAppear on the screen, Clock will be selected Or CH button repeat Edly until the correct hour appearsCustomizing the Picture Press Menu to display menuUsing Automatic Picture Settings Press Menu to display the menuCustomizing the Sound Using Automatic Sound Settings Press the Menu button to display the menuSetting The On/Off Melody Viewing a VCR or Camcorder Tape Press the VOL+ or VOL- buttonSetting Up Your Remote Control to Operate Your VCR Customizing Your Remote ControlTurn off your VCR On your Samsung remote control, press SET VCR Codes Setting Up Your Remote Control to Operate Your Cable Box Cable Box CodesFine Tuning Channels Press the VOL+ and VOL- buttons to adjust the fine tuningChanging the Screen Size Digital Noise Reduction Tilt TXM2792F Press the CH button to select TiltUsing the Surf Feature Setting the On/Off Timer Function menu, then Press the VOL+ buttonSetting the Sleep Timer When finished, press the VOL + buttonSound Features Choosing a Multi-Channel Sound MTS SoundtrackExtra sound settings Turbo Sound, Surround, or Auto Volume Turbo SoundViewing Closed Captions Function menu Press the VOL+ buttonSetting Up Your Personal ID Number PIN Using the V-ChipPress the Menu button three times to exit How to Enable/Disable the V-Chip How to Set up Restrictions Using the TV guidelinesTV-Y Young children TV-Y7 Children 7 and over General audienceParental guidance TV-14E C I a L F E AT U R E S Repeatedly press the CH Identifying Problems Chapter FiveUsing Your TV in Another Country Cleaning and Maintaining Your TVSpecifications