Samsung 25A6, 29A5, 29A6, 29A7, 29K3, 29K5, 29M6, 29U2, 34A7 manual

Page 37

Automatic Degaussing to Remove Colour Patches

ENG

A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the television manually.

If you move the television to a different position and color patches appear on the screen, you must:

Switch the television off by pressing the “POWER ” (ON/OFF) button on the front panel

Unplug the television from the wall socket

Leave the television power-off (stand-by) for about 30 minutes so that the automatic degauss function can be activated, and then press the POWER button on the remote control.

If your television will be left unattended, press the “POWER ” (ON/OFF) button to turn your television off.

Troubleshooting: Before Contacting Service Personnel

Before contacting Samsung after-sales service, perform the following simple checks.

If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer.

No sound or picture

Check that the mains lead has been connected to a wall socket.

 

Check that you have pressed the POWER

 

(ON/OFF) button.

 

Check the picture contrast and brightness settings.

 

Check the volume.

 

 

 

 

 

 

 

 

Normal picture but no sound

Check the volume.

 

 

 

 

Check whether the MUTE

 

button has been pressed on the

 

remote control.

 

 

 

 

 

 

 

 

No picture or black and white picture

Adjust the colour settings.

 

 

 

 

Check that the broadcast system selected is correct.

 

 

Sound and picture interference

Try to identify the electrical appliance that is affecting the television

 

and move it further away.

 

 

 

 

Plug your television into a different mains socket.

 

 

Blurred or snowy picture,

Check the direction, location and connections of your aerial.

distorted sound

This interference is often due to the use of an indoor aerial.

 

 

Remote control malfunctions

Replace the remote control batteries.

 

Clean the upper edge of the remote control (transmission window).

 

Check the battery terminals.

 

 

 

 

 

 

 

 

 

37

Image 37
Contents Colour Television System Safety InstructionsContents Front Control Panel depending on the model Connection Panels depending on the model Infrared Remote Control All Functions Except Teletext Buttons and markings are subject to change Infrared Remote Control Teletext FunctionsConnecting the Aerial or Cable Television Network Inserting the Batteries in the Remote ControlPlacing Your Television in Standby mode Switching Your Television On and OffIf you want to reset this feature Plug & Play FeatureViewing the Demonstration Choosing Your Language Then Storing the Channels AutomaticallyAuto ↔ PAL ↔ Secam ↔ NT4.43 ↔ NT3.58 option Storing the Channels ManuallyBG ↔ DK ↔ I ↔ M option If no sound or abnormal sound If you know the number of the channel to be stored, pressIf you do not know the channel numbers, press Giving Channels Names Skipping Unwanted Channels Fine tuning Channel Reception Sorting the Stored Channels Custom ↔ Standard ↔ Sports ↔ Natural ↔ Mild Changing the Picture StandardTo adjust Press Adjusting the Picture SettingsSelecting the Picture Format depending on the model Activating/Deactivating the Digital Noise Reduction FeatureUsing the Tilt Control Feature Option Changing the Sound Standard depending on the model Adjusting the Sound Settings depending on the modelCustom ↔ Standard ↔ Music ↔ Movie ↔ Speech Extra Sound Settings depending on the model Selecting the Sound Mode depending on the model Switching the Sound Off Temporarily Adjusting the VolumeSelecting the Turbo Sound Setting and Displaying the Current Time Setting the Sleep TimerIf the sleep timer is Screen displays To display Press the Display ButtonSwitching the Television On and Off Automatically Activating the Childlock Setting the Blue Screen ModeTeletext Decoder ContentsDisplaying Teletext Information To display Press Selecting a Specific TeletextStoring Teletext Pages Using Flof to Select a TeletextConnecting to the S-VIDEO Input depending on the model Connecting to the AV-1 or 2 Input/OutputsConnecting to the RCA Input depending on the model Connecting to the DVD Input depending on the modelViewing Pictures From External Sources Connecting HeadphonesAutomatic Degaussing to Remove Colour Patches Troubleshooting Before Contacting Service PersonnelMemo Memo After Sales Service