connecting & setting up
CONNECTING A SET TOP/CABLE BOX OR SATELLITE RECEIVER TO DVD RECORDER & VCR
TV + Set top/Cable box or satellite receiver + DVD Recorder & VCR
With the connection below, you can watch and record your desired channel on the Set top/Cable box or satellite receiver. The
You can record channels by selecting the channel on the Set top/Cable box or satellite receiver. You cannot record one channel while watching another channel.
Be sure that the Set top/Cable box or satellite receiver is turned on.
●CONNECTING & SETTING UP
Yellow Red White
Connecting the IR Blaster cable into the Set top/Cable Box Control jack
1.Find and Connect the included IR Blaster cable into the Set top/Cable Box Control jack of the DVD Recorder & VCR.
2.Find the Set top/Cable Box IR Sensor
A.Turn the Set top/Cable box Off.
B.Hold the Set top/Cable box’s remote so that it touches the front of the Set top/Cable Box device (see Figure 1)
Figure 1
Correct Incorrect
English _19