Samsung CXM 2785TP For more information on, Selecting tape speeds, see pages 5.6, 5.7, and A.2

VCR O P E R AT I O N

10

Press the UP/DOWN▲▼ button to select “SPEED”, then press the LEFT/RIGHT œ√ buttons to select speed at which you want to record.

▼ For more information on

selecting tape speeds, see pages 5.6, 5.7, and A.2.

11

Press the UP/DOWN▲▼ button to select “Mode”, then press the UP/DOWN▲▼ buttons to select “Once”, “Wkly”, or “Daly”.

12	▼	To enter additional program
	recording times, repeat steps 1-11.
Press the MENU button to
exit the menu system and	If you enter two program times that
return to normal viewing.	overlap, a program overlap warning
	appears on the TV screen, along with
	instructions for fixing the overlap.
	The timer indicator on the front panel
13	of the TV illuminates when program
	times have been stored.
Press the POWER button	The TV should be turned off to
to turn off the VCR.
	record the programs you’ve chosen.

IMPORTANT:

•The TV should be off to record the programs you’ve chosen. But, if you are recording a channel that comes through a cable box, be sure to leave the cable box turned on and tuned to the channel you want to record.

•When a timer recording is in progress, there is no picture on the monitor because the power is off. If you want to watch the channel while it's being recorded, press POWER on the remote control only.

•One-time timer programs clear from memory automatically when the recording is finished. Daily and weekly programs remain in the timer until you remove them. If power to the TV is interrupted,timer program will be removed from memory.

The clock and calendar, however, must be reset.

5.12 CHAPTER FIVE: VCR OPERATION