Deck Control Buttons Basic VCR Operation

Deck Control Buttons

Basic VCR Operation

POWER	OPEN/CLOSE
	1

2	3
	4

The DVD-VCR uses one set of controls to operate both decks. The following buttons are helpful in successfully controlling each deck.

1POWER Button

Press the POWER button on the remote control or front panel to turn on the DVD-VCR.

2DVD Button

Press the DVD button on the remote control or front panel when you want to control the DVD deck.

•The DVD indicator will light on the Front Panel Display to show that the DVD deck is selected.

3VCR Button

Press the VCR button on the remote control or front panel when you want to control the VCR deck.

•The VCR indicator will light on the Front Panel Display to show that the VHS deck is selected.

4INPUT SEL. Button

Press the INPUT SEL. button repeatedly to cycle through all of your input sources, including the Tuner (Ch##), Line 1 (rear AV input), and Line 2 (front AV input).

•Input select is only available when the VCR deck is selected.

To play a standard VHS videotape, just insert it into the VCR deck and press the Play button. You can turn on the Auto Play to enable the VCR deck to play automatically when you insert a videotape that is missing the Record Safety Tab.. See page 53.

1	Insert VHS Tape
	Insert a standard VHS videotape into the VCR deck.
	• When a videotape is inserted, power will turn on automatically.

2	Play Tape
	Press the ❿ll (PLAY/PAUSE) button on the remote control or on
	the front panel of the unit. The videotape will begin to play
	automatically if it is missing the Record Safety Tab and Auto Play is
	turned on. See page 53

3	Stop Playback
	Press the ■ (STOP) button on the remote control or on the front
	panel of the unit.

4	Eject Tape
	Press the OPEN/CLOSE button on the remote control or the
	EJECT button on the front panel of the unit.

5	Additional VCR Options
	• See pages 52~54 for special VCR Playback features.

CHANNEL	DVD/VCR PROGRESSIVE	LINE IN 2
		1

Basic DVD Operation

•	See pages 55~57 for VCR Recording features.
•	See page 58 for Timer Recording features.

OPEN/CLOSE

Fllow the instructions below to playback a DVD.

1Open the Disc Tray

Press the OPEN/CLOSE button on your remote control or on the front panel of the unit to turn on the power and open the disc tray.

2Insert a Disc

Put a disc in the center of the tray, with the label-printed side facing up.

3Close the Disc Tray

Press the OPEN/CLOSE button on your remote control or on the front panel of the unit to close the disc tray.

4Play a DVD

Press the PLAY/PAUSE button on your remote control or on the front panel of the unit.

•Most discs will start to playback as soon as the tray closes.

•If a DVD has a MENU, the menu may pop up on TV screen.

5Additional DVD Options

•See pages 25 ~ 35 for advanced DVD Setup options.

•See pages 36 ~ 51 for special DVD Playback features.

CHANNEL	DVD/VCR PROGRESSIVE	4
		LINE IN 2