Samsung DVD-R120 instruction manual Auto Clock Set, Method 1

2. Clock Set

This menu is used to set the current time. You need to set the time to use timer recording.

Auto Clock Set

1 With the unit in Stop mode/No Disc mode, press the MENU button.

No Disc		Timer Record
Timer Rec.	Timer Record	√
Setup	Scheduled Record List	√

MOVE SELECT RETURN EXIT

2 Select Setup using the …† buttons, then press the ENTER or √ button.

No Disc			Setup
Timer Rec.	System		√
Setup	Language		√
	Audio		√
	Video		√
	Parental Control		√
MOVE	SELECT	RETURN	EXIT

3 Select System using the …† buttons, then press the ENTER or √ button.

System menu will be displayed.

No Disc			System
Timer Rec.	Clock Set		√
	Channel Set
Setup			√
	CM Skip Time	: 15 Sec	√
	EP Mode Time	: 6Hours	√
	Chapter Creator	: Off	√
MOVE	SELECT	RETURN	EXIT

■ The Menus are slightly different

4 Select Clock Set using the …† buttons, then press the ENTER or √ button.

Clock Set menu will be displayed.

No Disc		Clock Set
Timer Rec.	Auto Clock Set	√
Setup	Manual Clock Set	√

MOVE SELECT RETURN EXIT

You must have the antenna connected to set the Auto Clock. See pages 15~16 for Antenna connections(Method 1, 2 and 3).

Method 1 and 3

If you have the Antenna connected via Method 1 or 3 on pages 15-16.

The DVD Recorder automatically sets the clock by searching for a channel that carries a time signal and sets your time zone and daylight saving(if applicable).

5 Select Auto Clock Set using the …† buttons, then press the ENTER or √ button.

6 Press the ENTER or √ button.

Select On using the …† buttons, then press the ENTER or √ button.

No Disc		Auto Clock Set
Timer Rec.	Auto Clock Set	Off
Setup	Clock Data CH	On
	Time Zone	: Automatic	√
	Daylight Saving	: Automatic	√

MOVE SELECT RETURN EXIT

Connecting & Setting UP

NOTE

depending on whether a disc is inserted or not. The menus described on the next few pages are with no disc in the unit.

English -23