VideoDisplay Setting, TV Aspect, Input Level

Video(Display) Setting

This allows you to set up the TV screen settings.

1.With the unit in Stop mode/No Disc mode, press the MENU button.

2.Select Setup using the ▲▼ buttons, then press the ENTER or ► button.

3.Select Video using the ▲▼ buttons, then press the ENTER or ► button.

4.Select TV Aspect using the ▲▼ buttons, then press the ENTER or ► button.

5.Select the desired item(4:3 Letter Box, 4:3 Pan-Scan or 16:9 Wide) using the ▲▼ buttons.

Then press the ENTER or ► button.

	If you have a 4:3 standard TV
	• 4:3 Letter Box : Select when you want to see the total 16:9 ratio screen
	DVD supplies, even though you have a TV with a 4:3 ratio screen. Black
	bars will appear at the top and bottom of the screen.	System
	• 4:3 Pan-Scan : Select this for a conventional size TV when you want to	System

	see the central portion of the 16:9 screen. (Extreme left and right side of
	movie picture will be cut off.)	Setup
	If you have a wide screen TV or 4:3 standard TV with a wide-screen mode	Setup

	• 16:9 Wide : You can view the full 16:9 picture on your widescreen TV.

Adjusts the level of the input signal.

•Darker : If you feel the screen is too light and you want to make the screen darker.

•Lighter : If you feel the screen is too dark and you want to make the screen lighter.

Adjusts the black level of the screen.

• 0 IRE : Select this when you want a darker screen.

• 7.5 IRE : Select this when you want a lighter screen.

■ Black level function is not available in the progressive scan mode.

•On : Provides a cleaner picture through noise reduction (for recording).

•Off : Normal

English - 31