Your New Wide TV
Rear Panel Jacks
Use the rear panel jacks to connect components such as a VCR. You can connect different components such as VCRs,
ŒANTENNA terminals
Two independent cables or antennas can be connected to
these terminals. Use “ANT 1 IN (CABLE)” and “ANT 2 IN (AIR)” terminals to receive a signal from VHF/UHF antennas or your cable system. (Refer to pages 16~18)
´SERVICE
This jack is for service only.
ˇDIGITAL AUDIO OUT (OPTICAL) jack
Connect to a Digital Audio Component. (Refer to page 23)
¨DVI (Digital Video Interface) AUDIO input jacks Connect to the digital audio output jacks of a device with DVI output. (Refer to page 23)
ˆ
Connects an
ØVIDEO/AUDIO input jacks
Connect video/audio signals from external sources, such as VCR or DVD players. (Refer to pages 19 and 21)
∏VIDEO/AUDIO output jacks
Sends video/audio signals from the TV to an external source, such as a VCR. These jacks are available only in TV, Video and
”COMPONENT IN 1, 2 jacks (Y, PB, PR, AUDIO L/R) Use these jacks to connect the component video/audio signals from a DVD player or a
English - 12
’PC VIDEO Input jack
Connect these to the video output jack on your PC.
˝PC AUDIO Input jack
Connect these to the audio output jack on your PC. (Refer to page 104)
ÔSERVICE 2
This jack is for service only.
HDMI (High Definition Multimedia Interface)/ DVI Input jack (HDMI 2/DVI IN)
Connect to the HDMI jack of a device with HDMI output.
This input can also be used as a DVI connection with separate analog audio inputs. An optional HDMI/DVI cable will be necessary to make this connection. When using the optional HDMI/DVI adapter, the DVI analog audio inputs on your TV allow you to receive left and right audio from your DVI device. (Not compatible with PC) (Refer to pages 22~23)
ÒHDMI (High Definition Multimedia Interface) Input jack (HDMI IN 1)
Connect to the HDMI jack of a device with HDMI output.
ÚPOWER IN
Connect the supplied power cord.
Downloaded from www.Manualslib.com manuals search engine