Notice
The picture may appear corrupted or have static for some channels when the TV is connected to the Samsung Wireless LAN Adapter. If this occurs, reconnect the Samsung Wireless LAN Adapter using the extension cable included in the box with the LAN Adapter.
04 Advanced
or
Method: Connect via an extension cable
To reconnect the Samsung Wireless LAN Adapter using the extension cable, follow these steps:
✎✎The Samsung Wireless LAN Adapter should be installed in an
1.Connect the extension cable to the USB 2 (HDD) port.
2.Connect the extension cable and Samsung Wireless LAN Adapter.
3.Attach the Samsung Wireless LAN Adapter to the back of the TV near the top, using
Features
Network Setup (PBC (WPS))
How to set up using PBC (WPS)
If your router has a PBC (WPS) button, follow these steps:
1.Connect your TV to Samsung Wireless LAN Adapter as described in the previous section.
2.Turn on your TV, press the MENU button on your remote, use the ▲ or ▼ button to select Setup, and then press the ENTEREbutton.
3.Use the ▲ or ▼ button to select Network in the Setup menu, and then press the ENTEREbutton.
4.On the Network screen, select Network Type.
5.Set Network Type to Wireless.
6.Select Network Setup. The Network Setup screen appears.
Wireless Network Setup
Select a Network | : Not Selected |
| ► | ||||||||
Internet Protocol Setup | : Auto |
|
|
| |||||||
IP Address | : |
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
| ||||
Subnet Mask | : |
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| ||||
Gateway | : |
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
DNS | : Auto |
|
|
| |||||||
DNS Server | : |
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| ||||
|
| PBC(WPS) | UMove EEnter | RReturn | |||||||
|
| ||||||||||
7.Press the Red button on your remote.
8.Press the PBC (WPS) button on your router within 2 minutes. Your TV player automatically acquires all the network setting values it needs and connects to your network.
9.After the network connection is set up, press the RETURN button to exit the Network Setup screen.
Network Setup (Auto)
Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up security for your wireless network. If you use this method of setting up the network connection, and have a Security Key for your wireless network, you will have to enter the Pass Phrase during the setup process.
How to set up automatically
To set up the wireless connection automatically, follow these steps:
1.Follow Steps 1 through 6 in the “How to set up using PBC (WPS)” procedure.
2.Press the ▼ button to select Internet Protocol Setup, and then press the ENTEREbutton. Press the ▲ or ▼ button to select Auto, and then press the ENTERE button.
3.Press the ▲ button to go to Select a Network, and then press the ENTEREbutton. The Network function searches for available wireless networks. When done, it displays a list of the available networks.
4.In the list of networks, press the ▲ or ▼ button to select a network, and then press the ENTEREbutton.
✎✎ If the AP is set to Hidden (Invisible), you have to select Add Network and enter the correct Network Name (SSID) and Security Key to establish the connection.