Samsung LC530-ZA, BN68-02540A-04 Setting Up Anynet+, Switching between Anynet+ Devices, Recording

Page 31
If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the TV powers off. However, a device may not turn off if recording is in progress.
May not be enabled depending on the device.
When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.

Anynet+ Menu

The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.

Anynet+ Menu

Description

View TV

Changes Anynet+ mode to TV broadcast mode.

Device List

Shows the Anynet+ device list.

(device_name) MENU

Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of

 

the DVD recorder will appear.

(device_name) INFO

Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the

 

play menu of the DVD recorder will appear.

Recording: (*recorder)

Starts recording immediately using the recorder. (This is only available for devices that

 

support the recording function.)

Stop Recording: (*recorder)

Stops recording.

Receiver

Sound is played through the receiver.

If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it will be represented as (*device_name).

¦¦ Setting Up Anynet+

OO MENUm→ Application → Anynet+ (HDMI-CEC) → ENTERE

■■ Setup

Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.

✎✎

Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.

✎✎

✎✎

¦¦ Switching between Anynet+ Devices

1.Anynet+ devices connected to the TV are listed.

✎✎ If you cannot find a device you want, press the red button to refresh the list.

2.Select a device and press the ENTEREbutton. You can switch to the selected device.

✎✎ Only when you set Anynet+ (HDMI-CEC) to On in the Application menu, the Device List menu appears.

xx Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching operation.

xx If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List.

¦¦ Recording

You can make a recording of a TV Program using a Samsung recorder.

1. Select Recording.

✎✎ When there are more than two recording devices

xx When multiple recording devices are connected, the recording devices are listed. Select one recording device in the Device List.

✎✎ When the recording device is not displayed, select Device List and press the Red button to search devices.

2.Press the EXIT button to exit.

✎✎ You can record the source streams by selecting Recording: (device_name).

✎✎ Pressing the �(REC) button will record whatever you are currently watching. If you are watching video from another device, the video from the device is recorded.

✎✎ Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an antenna to a recording device, refer to the recording device’s users manual.

English 31

04 Advanced Features

Page 30 Page 32
Image 31
Page 30 Page 32
Contents BN68-02540A-04 Service 55 Standish Court MississaugaSamsung Electronics Canada Inc., Customer Serial NoStill image warning Securing the Installation SpaceInstallation with a stand Installation with a wall-mountContents Getting Started List of FeaturesAccessories Installing the LCD TV StandViewing the Control Panel Buttons on the remote controlProduct color and shape may vary depending on the model Viewing the Remote Control Press the or button, then press the ENTEREbutton Connecting to an AntennaPlug & Play Initial Setup Or Home UseConnections Connecting to an AV DeviceLN40C540 / LN46C540 For better picture quality, Connecting to an Audio DeviceComponent connection is Recommended over the A/V Connection ConnectionsConnecting to a PC Component Composite AV Coaxial RF EX-LINKEdit Name Basic FeaturesHow to Navigate Menus Source ListAuto Program Channel ListAdd to Favorite / Delete from Favoritet Antenna Air / CabletFine Tune Other FeaturesClear Scrambled Channel ProgrammedScreen Auto Adjustment tECO Solution ModeChanging the Picture Options Advanced SettingsOO MENUm→ Picture → Advanced Settings → Picture OptionsVirtual Surround Off / On Picture Reset OK / CancelMode t EqualizerPreferred Language Auto Volume Off / Normal / NightSound Reset Dialog Clarity Off / OnLocking Programs Using the Sleep TimerSetting the On/Off Timer SecurityL sub-ratings in TV-14 and TV-MA will Contains themes or content which may not beRestricted to adults Categories dealing with more sensitive materialCaption → 2 → 4 → Power onOO MENUm→ Setup → Entere Menu LanguageSupport Menu PIP tSelf Diagnosis Picture In Picture PIPContact Samsung Software UpgradeNot to disconnect the power or remove the USB drive HD Connection GuideConnecting a USB Device Advanced FeaturesMedia Play But you cannot play the Game itself FeaturesVideos Screen DisplayYy Supported Video Formats Photos MusicMedia Play Additional Functions Playing Multiple FilesMonthly Sorts and shows photo files by month Same file name as the video Audio SettingsHome Theater Anynet+Hdmi Cable Switching between Anynet+ Devices Setting Up Anynet+Recording Listening through a Receiver Troubleshooting for Anynet+Information Installing the Wall MountOther Information Anti-theft Kensington Lock30~40 200 X 46~55 400 X 57~65 600 X 70~80 800 X 80~ 1400 X Product Family InchesQuantity 19~22 75 X 100 X 23~29 200 XTV-Holder BN96-15753A Screw Securing the TV to the WallTV-Holder Kit Sold Separately M6 X L16 32 ~ 40 inch TVsSolutions and Explanations TroubleshootingOther Information English Storage and Maintenance License SpecificationsDimensions Anynet+ Auto Adjustment Blanking Bracket Balance ComponentPower Indicator Remote Control Index
Top Page Image Contents