Congratulations on the purchase of your new Samsung TV.
Read this setup guide to get your TV up and running quickly.
| STOP | 1-800-SAMSUNG (1-800-726-7864) |
| Samsung Electronics America, Inc. |
| Please do not return this unit. | 85 Challenger Road Ridgefield Park, NJ 07660-2112 |
| Samsung Electronics Canada Inc. |
| If you have problems operating your | 55 Standish Court Mississauga, Ontario L5R 4B2 |
| TV, call: | Call Center hours of operation: Mon-Sun, 9:00 AM -12 |
| 1-800-SAMSUNG (1-800-726-7864) | AM EST. |
| To register this product, visit: www.samsung.com/ |
| For web support please visit: |
| register. |
| www.samsung.com/support |
| |
Step 1: Install the Stand
Follow the steps below to connect the TV to the stand.
✎✎NOTE
xx Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
xx Make sure that at least two persons lift and move the LED TV.
xx Stand the product up and fasten the screws. If you fasten the screws with the LED TV placed down, it may lean to one side.
Connecting an AV device (DVD/Blu-ray player, cable/satellite box, etc.)
Use one of the connections below to connect your TV to an external A/V device.
We recommend using HDMI for the highest picture quality.
✎✎When connecting to AV IN 1 on the back of your TV, attach the video cable (yellow) to the green jack next to the AV IN 1 label. The jack will not match the color of the video cable (yellow).
HDMI Cable (Not Supplied)
HDMI to DVI Cable (Not Supplied)
Audio Cable (Not Supplied)
Best Connection
HD connection (up to 1080p)
Using an HDMI Cable
HDMI OUT DVD, Blu-ray player, HD cable box, 
HD STB (Set-Top-Box) satellite receiver
Device
Very Good Connection
HD connection (up to 1080p) Using an HDMI to DVI Cable
DVI OUT
| Connect your TV to your Home Theater or other | Analog Audio connection |
| audio device to enjoy enhanced Sound quality. |
| | | | | | | | |
| | | | | | | | Using an Audio Cable |
| | | | | | | | Amplifier / DVD home theater |
| | | | | | | AUDIO IN |
| | | | | | | | | | | | | | |
| | | Audio Cable (Not Supplied) | | | | | | | | |
| | | Digital Audio connection |
| | | | | | |
| | | | | | | Using an Optical Cable |
| | | | | | |
| | | | | | | | | Digital Audio System |
| | | Optical Cable (Not Supplied) | | | | | | | | |
| | | OPTICAL |
| | | | | | |
| | | | | | |
| | | | | | | | | | | | | | |
| | | | | | | | | | | | | | |
Connecting a PC
Connect your TV to a PC to use it as a Monitor.
HDMI to DVI Cable | HD connection |
(Not Supplied) | |
| Using an HDMI to DVI Cable |
| DVI OUT |
2 With your TV upright, connect the | 3 Fasten two screws (M4 X L8) at |
TV to the Stand as shown. | position 1, and then fasten three |
| screws (M4 X L8) at position 2. |
| Screws (M4 X L8) 2 |
| s |
| s |
Step 2: Install the Batteries into the Remote
To install batteries into your remote control, follow these steps:
1.Lift the cover on the back of the remote
upward as shown in the figure to the 
right.
2.Install two AAA batteries.
✎✎ Make sure to match the + and - ends of the batteries to the diagram in the battery compartment.
3.Replace the cover.
Step 3: Connect Power and Antenna or Cable
VHF/UHF Antenna
Antenna Cable | Connect Ant In to |
(Not Supplied) | | |
| | • | Wall cable jack |
| |
| | • VHF/UHF Antenna |
or | • | Cable or Satellite box |
| |
Ant or Cable Out
Use a 75 ohm (round) cable.
Step 5: Run Plug & Play
When you turn on your TV for the first time, it automatically launches the Plug & Play function. With Plug & Play, you can select the On Screen Display language, set the clock mode, and launch the TV’s channel memorizing process.
It also displays connection instructions similar to those in this guide.
To navigate while Plug & Play is running, press the Up, Down, Left or Right arrow buttons on your remote. To make a selection, press the ENTEREbutton.
To skip a screen, press the MENU button. To turn on your TV, press the POWER button on the remote or on the TV. To run Plug & Play, follow these steps:
1 Using your remote control, select | | Plug & Play | | |
the language for the On Screen | Select Language of the OSD. | English | |
Display (OSD), and then press | |
| | |
ENTEREbutton. | Menu Language | : | Español | |
Français | |
2 Select Home Use, and then | | | |
| | UMove | EEnter |
press the ENTEREbutton. | | | | |
If you select Store Demo, the TV will reset your picture and audio settings |
every 30 minutes. | | | | |
3Select Antenna Source. If Antenna Source is Air, Cable or Auto, you must select your cable system type. After selecting source, select Search; then press the ENTEREbutton on your remote.
✎✎Most cable systems are Standard(STD) systems, If you are not sure about what kind of cable system you have, contact your cable company.
✎✎If your TV is attached to a cable or satellite box, skip Steps 3 through 5. After Plug & Play is complete, set your TV to Channel 3 or 4, according to the directions for your cable or satellite box.
4The TV memorizes the available channels. This process can take up to 45 minutes.
5After the TV has memorized the channels, choose the Clock Mode. Select Auto if you have a digital channel in your area. Select Manual if you don’t, or if you have a cable or satellite box. When done, press the ENTEREbutton.
✎✎If you select Manual, the clock setting screen appears.
6Select the daylight savings time setting: Off or On, and then press the ENTEREbutton.
✎✎This function is only available when the Clock Mode is set to Auto.
7Select the time zone in which you live, and then press the ENTEREbutton.
8After the time zone screen, The connection method for best HD screen quality is displayed. Press Right arrow button on your remote to view each screen in succession. Press the Blue button to skip this section.
9The Enjoy your TV. screen appears. Then press the ENTEREbutton.
Changing the Screen Size
Your TV has several screen size options, each designed to work best with specific types of video input. If you have a cable box or satellite receiver, it may have its own set of screen sizes as well.
To change the screen size, press the P.SIZE button on your remote. The first time you press it, your TV displays the current setting. Thereafter, each time you press the P.SIZE button, you change the size of the picture on the screen.
The following sizes are available:
16:9 Wide screen | | 4:3 Standard screen | | Wide Fit |
| | | | |
| | | | |
✎✎Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
Changing the Picture Mode
Your TV has four preset Picture Modes with factory adjusted settings, each designed to give you an excellent picture under specific conditions.
The Picture Modes are listed and described in the table below:
Mode | Description |
Dynamic | Brightens picture. For a vibrant, enhanced image in brightly lit or |
| sunny room. |
Standard | For a bright, detailed picture in a normally lit room. |
Natural | For a comfortable, easy-on-the-eyes picture in a normally lit room. |
| |
Movie | For a studio quality cinema picture in a dimly lit or dark room. |
| |
To change the Picture Mode, follow these steps:
1.Turn on your TV, press the TOOLS button on your remote. The Tools menu appears.
2.Using the ▲ or ▼ on your remote, select Picture Mode.
3.On the Picture Mode menu, use the ◄ or ► on your remote to select the Picture Mode you want.
4.Press the EXIT button to exit the menu.
Setting the Clock
Before you can use your TV’s On/Off Timer, you must set the clock. To set the clock, follow these steps:
1.Turn on your TV, press the MENU button on your remote, then select Setup → Time.
2.Select Clock Mode, and then press the ENTEREbutton.
3.Choose Auto or Manual.
xx If you select Auto, the current time will be set automatically using the time from a digital channel.
xx If you select Manual, you can set the Month, Day, Year, Hour, Minute and am/pm directly by pressing up, down, left and right arrow button on your remote.
4.Press the RETURN button on your remote when done.
