Samsung 9 Series Listening through a Receiver Home theater, Troubleshooting for Anynet+

Page 56

Listening through a Receiver (Home theater)

You can listen to sound through a receiver instead of the TV speaker.

1.Press the TOOLS button. Press the ENTEREbutton to select “Anynet+ (HDMI-CEC)”.

2.Press the ▲ or ▼ button to select “Receiver”. Press the ◄ or ► button to select “On” or “Off”.

3.Press the EXIT button to exit.

NIf your receiver supports audio only, it may not appear in the device list.

NThe receiver will work when you have properly connected the Optical IN jack of the receiver to the Optical Out jack of the TV.

 

 

 

 

View TV

 

 

 

Device List

 

 

 

Recording

:

DVDR

 

DVDR Operation

 

 

 

Receiver

◄

On

►

Setup

 

 

 

 

 

 

 

 

UMove

LAdjust

RReturn

NWhen the receiver (home theater) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver.

NWhen using the WISELINK Pro feature, sound may not output properly through the receiver.

NWhen listening through the receiver, there are restrictions for using the PIP and audio-related menus.

NIf there is a power interruption to the TV when the “Receiver” is set to “On” (by disconnecting the power cord or a power failure), the “Select Speaker” may be set to “External Speaker” when you turn the TV on again. (see page 20)

Troubleshooting for Anynet+

Symptom

Solution

Anynet+ does not work.

• Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.

 

• Connect only one receiver (home theater).

 

• Check if the Anynet+ device power cord is properly connected.

 

• Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections.

 

• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.

 

• Check whether the TV remote control is in TV mode.

 

• Check whether it is Anynet+ exclusive remote control.

 

• Anynet+ doesn’t work in certain situations. (Searching channels, Operating WISELINK Pro, Plug

 

& Play, etc.)

 

• When connecting or removing the HDMI 1.3 cable, please make sure to search devices again or

 

turn your TV off and on again.

 

• Check if the Anynet+ Function of Anynet+ device is set on.

I want to start Anynet+.

• Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-

 

CEC) is set to On in the Anynet+ Setup menu.

 

• Press the TV button on the TV remote control to switch to TV. Then press the TOOLS button to

 

show the Anynet+ menu and select a menu you want.

I want to exit Anynet+.

• Select View TV in the Anynet+ menu.

 

• Press the SOURCE button on the TV remote control and select a device other than Anynet+

 

devices.

 

• Press P >/<and PRE-CHto change the TV mode. (Note that the channel button operates

 

only when a tuner-embedded Anynet+ device is not connected.)

The message Connecting

• You cannot use the remote control when you are configuring Anynet+ or switching to a view

to Anynet+ device...

mode.

appears on the screen.

• Use the remote control when the Anynet+ setting or switching to view mode is complete.

The Anynet+ device does

You cannot use the play function when Plug & Play is in progress.

not play.

 

The connected device is

• Check whether or not the device supports Anynet+ functions.

not displayed.

• Check whether or not the HDMI 1.3 cable is properly connected.

 

• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.

 

• Search Anynet+ devices again.

 

• You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMI cables may not

 

support Anynet+ functions.

 

• If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord

 

or a power failure, please repeat the device scan.

The TV programme cannot

Check whether the antenna jack on the recording device is properly connected.

be recorded.

 

The TV sound is not output

Connect the optical cable between TV and the receiver.

through the receiver.

 

English - 54

Page 55 Page 57
Image 56
Page 55 Page 57
Contents Serial No Contact Samsung WorldwideContact Samsung Worldwide Precautions When Displaying a Still ImageDigital TV DVB-T Notice Contents Power Cord Program CD Cover-Bottom Cleaning Cloth Connecting and Preparing Your TV List of PartsInstalling the Wall Mount Kit Viewing the Control Panel Front Panel buttons= + P.PTV Side Panel TV Rear Panel # @ Power Input Viewing the Connection PanelPC in PC / Audio Connect to the video and audio output jack on your PCSupported modes for Hdmi / DVI and Component EXT 1, EXTConnect a LAN cable to this port to connect to the Network # Kensington Lock depending on the modelRemote Control Mini Remote Control Installing Batteries in the Remote ControlNormal Remote Control Mini Remote ControlSwitching On and Off Placing Your Television in Standby ModeViewing the Menus ModeStandardUsing the Wheel button Press the or button to select a menuPlug & Play Feature If you want to reset this featureChannel Control Storing Channels and channel CountryChannel mode Auto StoreManual Store Full Guide / Mini GuideDefault Guide Channel ModeSignal Information Using the Full / Mini GuideUsing the Colour buttons with the Channel List Managing ChannelsChannel Status Display Icons Digital Programme Guide and Viewing ReservationPicture Control Changing and Resetting the Picture Settings Mode StandardDetailed Settings Channel List Option Menu in ProgrammedDetailed Settings Customizing the Colour SpaceDNIe Digital Natural Image engine DNIe 1080p signals are inputPicture Options Picture Reset → Reset Picture Mode / Cancel Viewing Picture-in-PicturePIP → On / Off Main picture Sub pictureSetting Up Your PC Software Based on Windows XP Mode Resolution HorizontalPC Display Display ModesSetting up the TV with your PC Sound Control Changing the Sound StandardAuto Volume → Off / On Sound ResetAudio Language Audio Format → Mpeg / Dolby DigitalSelecting the Sound Mode Function Description Configuring the Setup MenuLanguage Child Lock → On / OffDigital Text → Disable / Enable UK Only Parental Lock → Parental RatingSubtitle Teletext LanguageLight Effect MelodyEntertainment Energy Saving by USB Software UpgradeCommon Interface Setting the Time Sleep Timer → Off / 30 / 60 / 90 / 120 / 150Timer 1 / Timer 2 / Timer Auto Power OffNetwork Connection Network Connection CableNetwork Connection Wireless  LAN Connection for Static IP EnvironmentNetwork Setup Cable Network SetupWireless Network Setup Cable Network Setup-Auto SetupSource List / Edit Name Wiselink Pro Connecting a USB Device Using the Remote Control Button in Product Guide MenuProduct Guide Button OperationsRemoving a USB Memory Device Safely Using the Wiselink Pro FunctionEntering the Wiselink Pro Menu ∂/∑ Using the Remote Control Button in Wiselink Pro MenuScreen Display Using and Sorting Photo List Changing the Favourites settingSorting Standard for the Photo List Photo List Option MenuViewing a Photo or Slide Show Viewing a Slide ShowPlaying current group To perform a SlideShow with only the selected filesSlide Show Option Menu Music List Option Menu Using and Sorting the Music ListSorting Standard for the Music List Playing a Music Playing a music filePlaying the music group Playing the selected music filesMovie List Option Menu Using and Sorting the Movie ListSorting Standard for the Movie List Playing the movie group Playing a Movie FilePlaying a movie file While removing files, don’t remove the USB memory device  Repeat Mode You can play the movie repeatedlyDeleting the Photo/Music/Movie File Picture/Music Settings Using Wiselink Pro Using the Setup MenuPicture Setting Sound SettingWiselink Pro-DLNA Setting the Dlna Network Installing the Dlna ApplicationNetwork Connections Diagram Connecting to the Network Install the application Using the Dlna Application Programme Screen LayoutFile Method Cancelling a Shared Folder  Applying the Current SettingsShare  Sharing a Folder Setting the Access Permission ServerHelp  Version Programme version information message box appearsUsing the Dlna Function Content Library Activating the Content Library Stop Content Library mode and Returns to TV modeYou can control the volume of the played content Exit Content Library modeUsing the Content Library Using Additional Content Using External USB Memory Storage Downloading New ContentsTo connect to Home Theater About Anynet Connecting Anynet+ DevicesTo connect to a TV Setting Up Anynet+ Scanning and Switching between Anynet+ DevicesAnynet+HDMI-CEC Anynet+ HDMI-CECAnynet+ Menu TV Remote Control Buttons Available in Anynet+ ModeRecording Troubleshooting for Anynet+ Listening through a Receiver Home theaterInfoLive Using InfoLive InfoLiveUsing the Weather Service Using the News ServiceSet up the Region Set up Weather OptionTo delete your favourite stocks Using the Stock ServiceSetting Favorite Stocks Items Position InfoLive Setup InfoLive’s Position Recommendations for Use Teletext Feature Setting Up Your Remote Control Part ContentsRemote Control Codes  VCR Samsung DVD  Samsung SET-TOP BOX DVD  SET-TOP BOX, Cable BOXSave Select a mode to save Position Position2 Entering the menuRemembering the Position Moving to the remembered positionTo avoid the TV from falling Using the Anti-Theft Kensington Lock depending on the modelSecuring the TV to the Wall Troubleshooting Before Contacting Service Personnel Plug your set into a different mains socketSpecifications Additional Terms of Service Public Content Posted to Yahoo No Resale of ServiceSpecial Admonitions for International USE IndemnityModifications to Service General Practices Regarding USE and StorageTermination Dealings with Advertisers and MerchantsTrademark Information Copyrights and Copyright AgentsGeneral Information Violations
Top Page Image Contents