Samsung 710V manual For Better Display, Authority

Page 70

For Better Display

1.Adjust computer resolution and screen injection rate (refresh rate) oncomputer as described below to enjoy the best quality of picture. You can have an uneven quality of picture in the screen if the best quality of picture is not provided in TFT-LCD.

{Resolution: 1280 x 1024

{Vertical frequency (refresh rate): 60 Hz

2.TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without uneasiness.

z For example, the number of TFT LCD sub pixels that is contained in this product are 3,932,160.

3.When you clean the monitor and the panel outside, please apply the recommended small amount of cleaner by using soft and dry cloth and polish it. Let LCD area not to be forced but to be scrubbed out softly.

If excessive force is applied, you can have a stain on it.

4.If you are not satisfied with the quality of picture, you can get better quality of picture by executing "auto adjustment function" in display screen that is appeared as window termination button is pressed.

If there's still noise after automatic adjustment, use FINE/COARSE adjustment function.

5.If you view a fixed screen for an extended period of time, residual image or blurriness may appear. Change the mode to energy save or set a screensaver to moving picture when you need to be away from the monitor for an extended period of time.

Authority

Information in this document is subject to change without notice. © 2005 Samsung Electronics Co., Ltd. All rights reserved.

Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden.

Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Samsung is the registered trademark of Samsung Electronics Co., Ltd.; Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation; VESA, DPMS and DDC are registered trademarks of

Video Electronics Standard Association; the ENERGY STAR name and logo are registered trademarks of the U.S. Environmental Protection Agency (EPA). As an ENERGY STAR Partner, Samsung Electronics Co., Ltd. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners.

Image 70
Contents SyncMaster 710V/910V/510M/710M/910M/712V/715V/701N Power Do not use a damaged or loose plug Use only a properly grounded plug and receptacleSet down the monitor carefully Do not drop the monitor when moving itPlace the monitor on a flat and stable surface Do not place the monitor face downClean Do not spray water or detergent directly on the monitorOther Do not use or store inflammable substances near the monitor Do not cover the vents on the monitor cabinetNever insert anything metallic into the monitor openings Page Not available in all locations UnpackingSoftware Front Cable Sub CableRear Enter buttonSyncMaster 510M/710M/910M Front Rear Page Monitor Assembly Attaching a baseWindows XP/2000 Click Windows XP/2000 DriverMicrosoft Windows XP Operating System Page Page How to install Click Start , Setting , Control Panel Microsoft Windows NT Operating System Linux Operating SystemHow to install the Natural Color software Natural Color Software ProgramSyncMaster 710V/910V/712V/715V/701N 713N Auto MagicBrightColor Tone Color Control Gamma Contrast Adjust the ContrastCoarse Fine Sharpness Position OSD Language Position Positon Transparency Display TimeSyncMaster 510M/710M/910M Menu Picture OSD Overview Install Page Following window appears if the installation is successful Installation Problems System RequirementsOSD Mode Color Tab Definition Image Tab Definition Option Tab Definition Support Tab Definition Color Calibration Page Uninstall Troubleshooting Can you see Check Signal Cable on the screen? No images on the screen. I cannot turn on the monitorScreen shows strange colors or just black and white Screen suddenly has become unbalancedSelf-Test Feature Check Useful Tips Judging the monitors working conditionGeneral LCD PanelPowerSaver Environmental considerationsPreset Timing Modes Preset Timing ModesModel Name SyncMaster Less than 38W Preset Timing Modes Model Name SyncMaster 510M Less than 25W Preset Timing Modes Select Model Name PowerSaver Preset Timing Modes Model Name SyncMaster 910M Less than 42W Preset Timing Modes Service Australia BrazilFrance Peru Ukraine United KingdomTerms For Better Display AuthorityUser Information FCC Information User InstructionsIC Compliance Notice European NoticeEurope Only Why do we have environmentally-labelled monitors?MPR II Compliance PCT NoticeLead What does labelling involve?Environmental Requirements CadmiumCFCs freons Why do we have environmentally labelled computers?TCO Development Environmental requirements Flame retardants ErgonomicsEcology EnergyEmissions TCO03 Recycling Information TCO03 applied model onlyVideo In / RS 232 / Video Out Transport and Storage LimitationsPower Off, Screen Saver, or Power Save Mode What is Image retention ?Suggestions for specific applications
Related manuals
Manual 64 pages 19.25 Kb