Viewing an External Signal Source (depending on the model)
TV | Input |
Source List | √ |
Edit Name | √ |
Move | Enter | Return | |
TV |
| Source List | |
TV |
|
|
|
AV1 |
|
| |
AV2 |
|
| |
|
| ||
Component |
| ||
Move | Enter | Return | |
TV |
|
| Input |
Source List |
| √ | |
Edit Name |
| √ |
Move | Enter | Return |
Use the remote control to switch between viewing signal from connected equipment, such as VCR, DVD,
1Press the MENU () button.
Result: The main menu is displayed.
2Press the ENTER () button to select Input.
Result: The options available in the Input group are displayed.
3Press the ENTER () button again to select Source List.
Result: The options available in the Source List group are displayed.
4Press the ▼ or ▲ button to select signal source, then press the ENTER () button.
➢When you connect equipment to the TV, you can choose between the following sets of jacks : AV1, AV2,
➢
5Press the MENU () button.
Result: The main menu is displayed.
6Press the ENTER () button to select Input.
Result: The options available in the Input group are displayed.
7Press the ▼ or ▲ button to select Edit Name. Press the ENTER () button.
Result: The options available in the Edit Name group are displayed.