The TV will not turn on.
The TV turns off automatically,
There is no picture/video.
The TV is not receiving all channels.
No Caption on digital channels.
The picture is distorted; macroblock, error, small block, dots, pixelization,
Purple/green rolling horizontal bars and buzzing noise from the TV speakers with Component cable connection.
The picture will not display in full screen.
The remote control does not work.
•Make sure the AC power cord is securely plugged into the wall outlet and the TV.
•Make sure the wall outlet is working.
•Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to 'Remotecontrol does not work' below.
•Ensure the Sleep Timer is set to Off in the Setup menu. (R 17)
•If your PC is connected to the TV,check your PC power settings.
•Make sure the AC power cord is plugged in securely to the wall outlet and the T_
•When watching TV from an antenna or cable connection, the TV will turn off after 10 - 15 minutes if there is no signal.
•Check cable connections. (remove and reconnect all cables connected to the TV and external devices).
•Set your external device's(Cable/Sat Box, DVD,
•Make sure your connected devices are powered on.
•Be sure to select the TV'scorrect source by pressing the SO JRCIE button on the remote control.
•Reboot the connected device by reconnecting the device'spower cable.
•Make sure the coaxial cable is connected securely.
•Please try Auto Program to add available channels to the channel list.
go to MENJ - Channel _ Auto Program then select Auto and make sure the correct Cable TV signal type is set in the menu. There are 3 options. (STD, HRO and IRC) (R 12)
®Verify the Antenna is positioned correctly.
,,Check Caption Setup menu. Try changing Caption Mode Service 1 to OO1. (R 19)
• Some channels may net have caption data.
,,Compression of video contents may cause picture distortion. Especially on fast moving pictures such as sports and action movies.
,,A low signal can cause picture distortion. This is not a TV problem.
Remove the left and right audio connections from the
,,HD channels will have black bars on either side of the screen when displaying upscaled SD (4:3) contents.
,,Black bars on the Top & Bottom will be shown on movies that have aspect ratios different from your TV.
®Adjust picture size option on your external device or TV to full screen.
,,Replace the remote control batteries with correct polarity
,,Clean the transmission window located on the top of the remote.
,,Try pointing the remote directly at the TV from