Samsung CT2Z47, CT2Z58, CT2Z55, CT2Z45, CT2Z57 Sound Mode / Adjust / Auto Volume, Troubleshooting

Page 6

Sound - Mode / Adjust / Auto Volume /

Turbo Sound (depending on the model)

Troubleshooting

If the TV seems to have a problem, first try this list of possible

Cleaning and Maintaining Your TV

Please follow the guidelines to get the maximum performance

Mode : Standard / Music / Movie / Speech / Custom You can select the type of special sound effect to be used when watching a given broadcast.

 

 

 

Sound

Mode

 

: Custom

Adjust

 

 

Auto Volume

: Off

Turbo Sound

: Off

Move

Adjust

Return

problems and solutions. If none of these troubleshooting tips apply, then call your nearest Samsung authorized service center.

Poor picture.

Try another channel.

Adjust the antenna.

Check all wire connections.

Poor sound quality.

from your TV.

Placement

Do not Place the TV near extremely hot, cold, humid or

dusty places.

Do not place TV near appliances with electric motor that

create magnetic fields, such as vacuum cleaners.

Keep the ventilation openings clear; do not place TV on a

Adjust : Bass / Treble / Balance

The television has several settings which allow you to control the sound quality.

If you make any changes to these settings, the sound mode is automatically switched to “Custom”.

Auto Volume

Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.

Turbo Sound

This feature suitably emphasizes both higher and lower bands of sound (and includes other effects). You can enjoy more magnificent and dynamic sound when watching music, movie, or other channels.

Sound - MTS (Multi-channel Television Sound)

(depending on the model)

Depending on the particular

program being broadcast, you AV

Mono

cannot listen to “Mono”, “Stereo”.

Only when the TV is set in AV mode, press the MTS button on the remote control repeatedly to select “Stereo”, “Mono”, or “SAP(Secondary Audio Program).

Try another channel.

Adjust the antenna.

No picture or sound.

Try another channel.

Press the SOURCE button.

Make sure the TV is plugged in.

Check the antenna connections.

Make sure the MUTE button is off.

No color, wrong colors or tints.

Make sure the program is broadcast in color.

Adjust the picture settings.

Picture rolls vertically.

Adjust the antenna.

Check all wire connections.

If you are using a VCR, check the tracking.

The TV operates erratically.

Unplug the TV for 30 seconds, then try operating it again.

Your remote control does not operate your TV.

Make sure the remote has batteries.

Check that the “+” and “-” ends of the batteries are inserted correctly.

Check that the batteries are drained.

The TV won’t turn on.

Make sure the wall outlet is working.

Make sure the TV is plugged in.

Make sure the remote has batteries.

Remote control malfunctions

Replace the remote control batteries.

Clean the upper edge of the remote control (transmission window).

Check that the “+” and “-” ends of the batteries are inserted correctly.

Check that the batteries are drained.

soft surface, such as cloth or paper.

Place the TV in a vertical position only.

Liquids

Do not handle liquids near or on the TV. Liquid that spills into it can cause serious damage.

Cabinet

Never open the cabinet or touch the parts inside.

Wipe your TV with a clean, dry cloth. Never use water, cleaning fluids, wax or chemicals.

Do not put heavy objects on top of the cabinet.

Temperature

If your TV suddenly move from a cold to a warm place, unplug the power cord and allow at least two hours for moisture that may have formed inside the unit to dry completely.

Using Your TV in Another Country

If you plan to take the TV with you to a foreign country please be aware of a different television systems that are in use around the world. A TV designed for one system may not work properly with another system due to differences in the TV channel frequencies.

Note: Main plug serves as the disconnect device during servicing and shall be readily operable.

English -

Image 6
Contents ANT Turning the TV On and Off Viewing the MenusInput Source List depending on the model You can switch between Viewing signal fromMethod Menu  / Setup  Enter  / Plug & Play   Source ListSetup Time Setup Child Lock Setup Language / Blue Screen Picture ModePicture Digital NR / DNIe Jr Sound Mode / Adjust / Auto Volume TroubleshootingCleaning and Maintaining Your TV OSD Map Viewing screen size 508mmThis page is intentionally Left blank