Viewing the Connection Panel
Connecting an Aerial or Cable Television Network (depending on the model)
To view television channels correctly, a signal must be received by the set from one of the following sources:
-An outdoor aerial
-A cable television network
-A satellite network
Connecting a Set-Top Box, VCR or DVD
-Connect the VCR, or DVD SCART cable to the SCART connector of the VCR, or DVD.
-If you wish to connect both the
Connecting a Computer
-Connect the 15 Pin
-Connect the stereo audio cable to the “PC AUDIO IN (STEREO)” jack ( 
)on the rear of your set and the other end to the “Audio Out” jack of the sound card on your computer.
➣ 15 Pin
Pin | Separate H/V | Composite H/V |
|
|
|
1 | Red (R) | Red (R) |
2 | Green (G) | Green (G) |
3 | Blue (B) | Blue (B) |
4 | Grounding | Grounding |
5 | Grounding (DDC return) | Grounding (DDC return) |
6 | Grounding - Red (R) | Grounding - Red (R) |
7 | Grounding - Green (G) | Grounding - Green (G) |
8 | Grounding - Blue (B) | Grounding - Blue (B) |
9 | No connection | No connection |
10 | Grounding - Sync. / Self test | Grounding - Sync. / Self test |
11 | Grounding | Grounding |
12 | DDC - SDA (Data) | DDC - SDA (Data) |
13 | Horizontal Sync. | Horizontal/Vertical Sync. |
14 | Vertical Sync. | Not used |
15 | DDC - SCL (Clock) | DDC - SCL (Clock) |
|
|
|