How to Install the Wall Bracket
How to Attach the LCD TV to the Bracket
The LCD TV in the picture may not look exactly like yours.
(You assemble the plastic screw anchors and the screws the same way regardless of the model of your TV.)
1 | Assemble the plastic screw anchors |
| and the screws. (See the picture below.) |
3 | Assemble the main body bracket as in the |
| pictures in 2. and below. |
2 | Assemble the main body bracket as below |
| and put the plastic screw anchors in. |
1)Attach the plastic screw anchors to each of the left/right brackets as in 1.
2)Assemble the bracket bars to the left/right brackets as in the picture on the left.
They are
Warning
1.Installing a wall bracket must be done by a qualified professional installer.
2.After you hang the LCD TV on the wall bracket, check from both sides to see if the plastic screw anchors are securely in place.
3.Be careful not to get your fingers caught during installation or while adjusting the angle of the bracket.
4.The LCD TV may fall from the wall and hurt someone if the wall bracket is not attached securely to the wall. Make sure the bracket is screwed tightly to the wall.
4 | Put the four holders on the back of the TV |
| into the holes on the wall bracket, (1) lower |
the TV, and (2) hang the TV on the bracket. Fasten the TV securely to the wall bracket with stickscrews as in (3) so that the two will not separate.
LCD TV
Wall
Wall bracket