Samsung 350 Life cycle or cause fi re Bend the outdoor antenna cable, Serious quality problem may

Getting Started

Avoid installing the product in a location exposed to direct sunlight and installing the product near a heat source such as a fi replace or heater.

	y This may shorten the product	!
	life cycle or cause fi re.
	Bend the outdoor antenna cable
	downwards at the location where
	it comes in the house so that
	rainwater does not fl ow in.
!	y If rainwater enters the product,	!
	it may result in electric shock
	or fi re.

Caution

Do not let the product drop while moving it.

y This may result in a problem with the product or injury.

!

When installing the product on a console or shelf, make sure that the front of the product does not protrude out of the console or shelf.

y Otherwise, this may cause the	!
product to fall off and result in
a malfunction or injury.

yMake sure to use a cabinet or shelf suitable to the size of the product.

		If the product is installed in a
		location where the operating
		conditions vary considerably,
	SAMSUNG	a serious quality problem may
		occur due to the surrounding
!		environment. In this case, install
		the product only after consulting
		one of our service engineers about
		the matter.

yPlaces exposed to microscopic dust, chemicals, too high or low temperature, high humidity, airports or stations where the product is continuously used.

Avoid installing the product where children may reach it.

yIf a child touches the product, the product may fall and this may result in injury.

ySince the front part is heavier, install the product on a fl at and stable surface.

Install the antenna far away from any high voltage cables.

yIf the antenna touches or falls onto a high voltage cable, it may result in electric shock or fi re.

Do not place the product face down on the fl oor.

yThis may damage the panel of the product.

When putting the product down, handle it gently.

yOtherwise, it may result in a problem with the product or injury.

English 6