Samsung LN0B530, LN6B530, LN3B530 setup guide Setting the Screen Size, Picture Adjustment

Customizing the Picture Settings

Your television has several setting options that allow you to control the picture quality.

To select the desired picture mode, follow the

1 “Changing the Picture Standard” instructions numbers 1 and 2.

Press the ▲ or ▼ button to select “Backlight”,

2 “Contrast”, “Brightness”, “Sharpness”, “Color” or “Tint(G/R)”, then press the ENTEREbutton.

Press the ◄ or ► button to decrease or increase

3 the value of a particular item. Press the EXIT button to exit.

➣When you make changes to “Backlight”, “Contrast”, “Brightness”, “Sharpness”, “Color” or “Tint(G/R)”, the OSD will be adjusted accordingly.

➣In PC mode, you can only make changes to “Backlight”, “Contrast” and “Brightness”.

➣Settings can be adjusted and stored for each external device you have connected to an input of the TV.

➣The energy consumed during use can be significantly reduced if the brightness level of the picture is lowered, which will reduce the overall running cost.

Picture	Mode		: Standard
	Backlight		: 8		►
	Contrast		: 95
	Brightness		: 45
	Sharpness		: 50
	Color		: 50
	Tint (G/R)		: G50/R50
	Advanced Settings
	Backlight				8
	Move	Adjust	Enter	Return

Picture Adjustment

•Backlight: Adjusts the brightness of LCD back light.

•Contrast: Adjusts the contrast level of the picture.

•Brightness: Adjusts the brightness level of the picture.

•Sharpness: Adjusts the edge definition of the picture.

•Color: Adjusts color saturation of the picture.

•Tint(G/R): Adjusts the color tint of the picture.

Setting the Screen Size

Occasionally, you may want to change the size of the image on your screen. Your TV comes with six screen size options, each designed to work best with specific types of video input. Your cable box or satellite receiver may have its own set of screen sizes as well. In general, though, you should view the TV in 16:9 mode as much as possible.

To select the desired picture mode, follow the

1 “Changing the Picture Standard” instructions number 1.

Press the ▲ or ▼ button to select “Picture Options”,

2 then press the ENTEREbutton. Press the ▲ or

▼button to select “Size”, then press the ENTERE button.

Press the ▲ or ▼ button to select the screen format

3 you want. Press the ENTEREbutton. Press the EXIT button to exit.

•16:9: Sets the picture to 16:9 wide mode.

•Zoom1: Magnifies the size of the picture on the screen.

•Zoom2: Magnifies the size of the picture more than “Zoom1”.

•Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen.

•4:3: Sets the picture to 4:3 normal mode.

•Screen Fit: Use the function to see the full image without any cutoff when HDMI (720p/1080i/1080p), Component (1080i/1080p) or DTV (1080i) signals are input.

English-17