OP E R AT I O N
Memorizing the Channels
Your TV can memorize and store all of the available channels for both
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable system).
1
Press the MENU button to display the menu.
Press the
UP/DOWN buttons to select “Channel”, then press the ENTER button.
2
Repeatedly press the ENTER button to cycle through these choices:
Air, STD, HRC or IRC (all cable TV).
Press the
UP/DOWN
buttons to select the Video signal source, then press the ENTER button.
Press the EXIT button to exit.
Note : STD, HRC and IRC identify various types of cable
TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area.
At this point, the signal source has been selected.
Proceed to “Storing Channels in Memory” (next page).