
PC D I S P L AY
Adjusting the Screen Quality
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone, then do the frequency adjustments to the utmost and fine tune again. After the noise has been reduced,
Press the PC button on the remote control to select the PC mode.
1
Press the MENU button to display the menu.
Press the CH ▼ button to select “PC”, then press the VOL + button.
2
Press the CH ▼ button to select “Coarse” or “Fine”.
3
Press the VOL + or VOL - button to adjust the screen quality, vertical stripes appear or the pic- ture may be blurry.
<Adjusting the Coarse>
<Adjusting the Fine>
4
When you are satisfied with the settings, press the MENU but- ton repeatedly to return to normal viewing.