Samsung LNB50 Turning the TV On and Off, Viewing the Menus, To Stop the Auto Program Function

Turning the TV On and Off

Press the POWER button on the remote control. You can also use the POWER button on the TV.

Viewing the Menus

With the power on, press the MENU button.

1 The main menu appears on the screen.

The menu’s left side has the following icons: Picture, Sound, Channel , Setup, Input, Application, Support.

Press the ▲ or ▼ button to select one of the icons.

2 Then press the ENTEREbutton to access the icon’s sub-menu. Press the EXIT button to exit.

➣The on-screen menus disappear from the screen after about one minute.

Storing Channels in Memory (Automatic Method)

	Press the MENU button to display the menu.
1
	Press the ▲ or ▼ button to select “Channel”, then
	press the ENTEREbutton.
	Press the ▲ or ▼ button to select “Auto Program”,
2
	then press the ENTEREbutton.
	Press the ▲ or ▼ button to select the antenna
3
	connection, then press the ENTEREbutton.

Auto Program

Select the Antenna source to memorize.

Air	Start
Cable	Start
Auto	Start
UMove EEnter	mSkip

4	When selecting the Cable TV system: Press the
	ENTEREbutton to start the auto program.

Press the ▲,▼, ◄ or ► to select the correct analog signal cable system source among “STD”, “HRC”, and “IRC”. Press the ▲ or ▼ button to select “Start”, then press the ENTEREbutton. If you have Digital cable TV, select the cable system signal source for both Analog and Digital.

Auto Program

Selects the cable system.

Analog	STD	HRC	IRC
Digital	STD	HRC	IRC
		Start
		UMove EEnter	mSkip

5	The TV begins memorizing all available stations.
	Press the EXIT button to exit.
		Auto Program
	Auto Program in Progress.
	DTV Cable : 12	Cable : 32		Cable 38
				50%
		Stop
			EEnter	mSkip
		Auto Program
	Removing scrambled channel.
	DTV Cable : 16	Cable : 45	DTV Cable 41
				77%
		Stop
			EEnter	mSkip

➣After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then reappears.

To Stop the Auto Program Function

Press the MENU button while the Auto Program function is being executed. You can also press the ENTEREbutton to stop the setup.

Checking to see if Channels were Stored in Memory

Press the CH button. Only the channels stored in memory will be selected (in order).

Selecting the antennas

•Air: “Air” antenna signal.

•Cable: “Cable” antenna signal.

•Auto: “Air” and “Cable” antenna signals.

English-