Connecting a VCR
Video Connection
TV Side Panel | TV Rear Panel |
VCR Rear Panel
3 | RF Cable |
(Not supplied) |
5 Audio Cable (Not supplied)
4 Video Cable (Not supplied)
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.
➣Each VCR has a different back panel configuration.
➣When connecting a VCR, match the color of the connection terminal to the cable.
1 | Unplug the cable or antenna |
from the back of the TV. | |
2 | Connect the cable or antenna |
to the ANT IN terminal on the | |
| back of the VCR. |
3 | Connect an RF Cable between |
the ANT OUT terminal on the | |
VCR and the ANT IN terminal | |
| on the TV. |
4 | Connect a Video Cable |
between the VIDEO OUT jack | |
on the VCR and the AV IN 1 | |
| [Y/VIDEO] or AV IN 2 [VIDEO] |
| jack on the TV. |
5 | Connect Audio Cables between |
the AUDIO OUT jacks on the | |
VCR and the AV IN 1 (or AV IN 2) |
[R-AUDIO-L] jacks on the TV.
➣If you have a “mono”
➣When connecting to AV NI 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).
S-Video Connection
TV Side Panel | TV Rear Panel |
VCR Rear Panel
To begin, follow steps
1 the previous section to connect the antenna or cable to your VCR and your TV.
|
| 2 | Connect Audio Cables between |
|
| the AUDIO OUT jacks on the | |
|
| VCR and the AV IN 2 | |
|
|
| |
|
| 3 | Connect an |
|
| between the | |
|
|
| on the VCR and the AV IN 2 |
|
|
| |
|
| An | |
1 | RF Cable | with a VCR. (If not, check your local | |
(Not supplied) | electronics store.) | ||
| Audio Cable | ➣ Each VCR has a different back | |
2 |
| panel configuration. | |
(Not supplied) |
| ||
|
| ➣ When connecting a VCR, match | |
3 |
| the color of the connection | |
| terminal to the cable. | ||
(Not supplied) |
| ||
English-