Samsung LN32A330J1N manual Connecting a VCR

Connecting a VCR

Video Connection

TV Rear Panel

VCR Rear Panel

	Unplug the cable or antenna
1
	from the back of the TV.
	Connect the cable or antenna
2
	to the ANT IN terminal on the
	back of the VCR.
	Connect an RF Cable between
3
	the ANT OUT terminal on the
	VCR and the ANT IN terminal
	on the TV.
	Connect a Video Cable between
4
	the VIDEO OUT jack on the
	VCR and the AV IN 1 [Y/VIDEO]

jack on the TV.

3	RF Cable
	(Not supplied)
4	Video Cable (Not supplied)

5 Audio Cable (Not supplied)

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

➣Each VCR has a different back panel configuration.

➣When connecting a VCR, match the color of the connection terminal to the cable.

➣When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).

Connect Audio Cables between

5 the AUDIO OUT jacks on the VCR and the AV IN 1 [R- AUDIO-L] jacks on the TV.

➣If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks of the TV. Alternatively, connect the cable to the “R” jack. If your VCR is stereo, you must connect two cables.

English-