Samsung LN-R1742 manual Connecting a VCR

Page 15

IN S TA L L AT I O N

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 6-9).

Skip step 1 if you have not yet connected to an antenna or a cable system.

1

Unplug the cable or antenna from the back of the TV.

2

Connect the cable or antenna to the ANTENNA IN terminal on the back of the VCR.

3

Connect a coaxial cable between the

ANTENNA OUT terminal on the VCR and the antenna terminal on the TV.

A coaxial cable is usually included with a VCR. (If not, check your local electronics store).

4

Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the AUDIO jacks on the TV.

If you have a “mono” (non-stereo) VCR, use the Y-connector (not supplied) to hook up to the left and right audio input jacks of the TV.

If your VCR is stereo, you must connect two cables.

5

Connect a video cable between the VIDEO OUT jack on the VCR and the VIDEO jack on the TV.

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

* Each external input source device has a different back panel configuration.

English-10

Image 15

Contents LN-R1742 Precautions When Displaying a Still Image Page Operation InstallationSpecial Features Your New TVTroubleshooting PC DisplayAppendix List of Parts List of FeaturesFamiliarizing Yourself with Your New TV Front Panel ButtonsVOL + Rear Panel Jacks Remote Control If remote control doesn’t work Installing Batteries in the Remote ControlAntennas with 300-ohm Flat Twin Leads Connecting VHF and UHF AntennasCable without a Cable Box Connecting Cable TVAntennas with 75-ohm Round Leads Separate VHF and UHF AntennasConnecting to a Cable Box that Descrambles Some Channels Connecting to a Cable Box that Descrambles All ChannelsEnglish-9 Connecting a VCR Connecting an S-VHS VCR Component Connecting a DVD PlayerAdjusting the Volume Turning the TV On and OffChanging Channels Viewing the Menus Viewing the DisplayChapter Four Plug & Play FeatureMemorizing the Channels Selecting the Video Signal-sourceStoring Channels in Memory Automatic Method To check the channels stored in memoryTo select channels over Alternate method ADD and DEL Channels Manual MethodTo select the Input Source To Edit the Input Source Name Alternate method Using Automatic Picture SettingsLEFT/RIGHT Customizing the PictureUsing Automatic Sound Settings To select the Sound option Selecting a Menu Language Setting the Blue Screen Mode Adjusting the Color Tone Reduces the differences in volume level among broadcasters Automatic Volume ControlOption 1 Setting the Clock Manually Setting the ClockEnter button This feature Setting the On/Off Timer Auto Power Off Sleep timer Setting the Sleep TimerViewing Closed Captions Setting Up Your Personal ID Number PIN Using the V-ChipHow to Enable/Disable the V-Chip TV-MA How to Set up Restrictions Using the ‘TV guidelines’English-39 English-40 General audience no restrictions Canadian English How to Set up Restrictions Using the Canadian EnglishCanadian French How to Set up Restrictions Using Canadian FrenchHow to Set up Your PC Software Windows only Using Your TV as a Computer PC DisplayAdjusting the Screen Quality Changing the Screen Position To Initialize the Screen Position or Color Settings How to Auto Adjust English-49 English-50 English-51 Customizing the Color Chapter Six Identifying ProblemsMove the computers mouse or press any key on the keyboard Using the Anti-Theft Kensington Lock Retractable Stand Mounting pad Installing Vesa compliant mounting devicesInstalling the Wall Mount Kit How to assemble the Wall Mount KitComponents Angle adjustment section of wall-mounted LCD TV How to adjust an angleUsing Your TV in Another Country Display ModeSpecifications