Samsung LE46M5 manual Using the Anti-Theft Kensington Lock, Buttons on the front of the set

Page 40

Using the Anti-Theft Kensington Lock

The Kensington lock is a device used to physically fix the system when using it in a public place.

The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer. Please refer to the manual provided with the Kensington lock for proper use.

Cable

Figure 2

Figure 1

<Optional>

The place of the Kensington Lock may be different depending on its model.

1.Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it in the locking direction (Figure 2).

2.Connect the Kensington lock cable.

3.Fix the Kensington lock to a desk or a heavy stationary object.

Troubleshooting: Before Contacting Service Personnel

No sound or picture	Check that the mains lead has been connected to a wall socket.
	Check that you have pressed the POWER	buttons on the front of the set.
	Check the picture contrast and brightness settings.
	Check the volume.
Normal picture but no sound	Check the volume.
	Check whether the MUTE button has been pressed on the remote control.
	Check if "Internal Mute" is off
No picture or black and white picture	Adjust the colour settings.
	Check that the broadcast system selected is correct.
Sound and picture interference	Try to identify the electrical appliance that is affecting the set and move it further away.
	Plug your set into a different mains socket.
Blurred or snowy picture,	Check the direction, location and connections of your aerial.
distorted sound	This interference is often due to the use of an indoor aerial.
Remote control malfunctions	Replace the remote control batteries.
	Clean the upper edge of the remote control (transmission window).
	Check the battery terminals.
"Check signal cable."	Check that the signal cable is firmly connected to the PC or video sources.
message is displayed.	Check that the PC or video sources are turned on.
On PC mode, "Not Supported Mode."	Check the maximum resolution and the frequency of the video adaptor.
message is displayed.	Compare these values with the data in the Display Modes.

The TFT LCD panel uses a panel consisting of sub pixels (3,133,440) which require sophisticated technology to produce.

However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

English-38

Image 40

Contents LCD TV Precautions When Displaying a Still Image Still image may cause permanent damage to the TV screenContents Installing the Wall Mount Kit Cleaning ClothList of Parts Œ Registration CardsSpeakers Remote Control Sensor PowerPower Indicator Viewing the Control PanelConnecting an Aerial or Cable Television Network Power InputViewing the Connection Panel Connecting HDMI/DVI Connecting Set-Top Box, VCR or DVDConnecting External A/V Devices Connecting AudioInstalling Batteries in the Remote Control Viewing the Remote ControlReplace the cover Switching On and Off Placing Your Television in Standby ModeIf you want to reset this feature Plug & PlayStoring Channels Automatically Storing Channels ManuallySetting the Channel Manager Activating the Child LockFine Tuning Channel Reception Sorting the Stored ChannelsAssigning Channels Names You can exchange the numbers of two channels, in order toAdjusting the Custom Picture LNA Low Noise AmplifierChanging the Picture Standard Changing the Colour ToneResetting the Picture Settings to the Factory Defaults You can return to the factory defaults picture settingsChanging the Picture Size Freezing the Current PictureViewing the Picture In Picture PIP DNIe Demo Digital Natural Image enginePress the Enter button again PIP Settings Adjusting the Sound SettingsConnecting Hheadphones Changing the Sound StandardSetting the TruSurround XT SRS Tsxt Adjusting the Volume AutomaticallySelecting the Internal Mute Listening to the Sound of the Sub PictureResetting the Sound Settings to the Factory Defaults Setting and Displaying the Current TimeSetting the Sleep Timer Switching the Television On and Off AutomaticallyUsing Game Mode Setting the Blue Screen Mode / Selecting the MelodyChoosing Your Language Blue ScreenUsing the Energy Saving Feature Press Button to select Setup, then press the Enter buttonSelecting the Source Editing the Input Source NamesPreviewing the DTV Menu System Available in the Digital TV mode Press the D.MENU buttonUpdating the Channel List Automatically Updating the Channel List Manually Editing Your Favourite ChannelsNumeric button 0~9 Press the D.MENU button to display the DTV menuSelecting Channel Manager MovePreview DeleteDisplaying Programme Information Viewing the EPG Electronic Programme Guide InformationWhile viewing a programme, press the Info button To exit from banner information, press the Info buttonUsing the Scheduled List Setting the Default GuideChannel will be switched to the scheduled program You can preset the default guide styleViewing All Channels and Favourite Channels Setting the Preferred LanguagesPreferred Subtitle Language English, Welsh, Gaelic, Irish Adjusting the Translucency Level Setting up the Parental LockEnter your new PIN code by using the numeric buttons 0~9 You can set the translucency of the menuSetting the Subtitle Setting the Digital TextSelecting the Preferred Language Subtitle or Audio You can activate and deactivate the subtitlesViewing Product Information Checking the Signal InformationUpgrading the Software Option Resetting This enables the user to select from the CAM-provided menuViewing Common Interface Selecting the CI Common Interface MenuTeletext Decoder Displaying the Teletext InformationPress the TTX/MIX button again Press the TV/DTV button to exit from the Text displayUsing Fastext to Select a Teletext Selecting a Specific TeletextSetting Up the Remote to Operate Your VCR Setting Up Your Remote ControlSetting Up the Remote to Operate Your Cable Box Setting Up the Remote to Operate Your DVD Setting Up the Remote to Operate Your STBRemote Control Codes VCRCable BOX Samsung SET-TOP BOX Setting up Your PC Software Based on Windows XP Display ModesAdjusting the PC Screen Automatically Auto Adjustment Setting the PCPress the Enter button to select Image Lock Using the Anti-Theft Kensington Lock Troubleshooting Before Contacting Service PersonnelŒ Check the picture contrast and brightness settings Buttons on the front of the setTechnical and Environmental Specifications Risk of Electric Shock do not Open United Kingdom This page is intentionally Left blank