Samsung LE46F8, LE40F8 Wall-Mount Adjustment Sold separately, Using the Remote Control Buttons

Wall-Mount Adjustment (Sold separately)

Once the wall mount is installed, the position of your TV can be easily adjustable.

TV Rear Panel Auto Wall-Mount

SERVICE Cable (Not supplied)

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select “Setup”, then press the

ENTER/OK button.

2.Press the ▲ or ▼ button to select “Wall-Mount Adjustment”, then press the ENTER/OK button.

3.Adjust to the desired position using the ▲,▼,◄,► buttons.

4.Press the EXIT button to exit.

If you press an arrow button when no OSD is displayed on the TV screen, the Adjustment screen appears.

When you turn the power off, your TV moves to the initial installation position.

When you turn the power on, your TV moves to the last remembered position you adjusted.

The auto wall mount will not work when Anynet+ is operating.

Using the Remote Control Buttons

TV	Setup
More
Wall-Mount Adjustment		
Energy Saving	: Off	
HDMI Black Level	: Low	
PIP		
SW Upgrade		
Move	Enter	Return

Wall Mount Adjusment

Position1

Position	1	2	3
Adjust	INFO	Center	Exit

	Button		Operations
			Wall-mount angle	Tilt Up, Tilt Down, Move right, Move left
			adjustment
			Reset	Moves to the initial installation position
			Remembering the	1.	Select the Direction buttons of the remote control.
			position and	2.	Press the red button (Select Position 1).
			moving to the	3.	Adjust the set to a desired position following the wall mount owner's
	green
	button		remembered		manual.
red		yellow		4.
button		button	position		The position you adjusted last is memorized as Position 1.
				5.	By using the green button (Select Position 2) and the yellow button
					(Select Position 3), you can save positions according to the
					procedures above.
				6.	You can save 3 respective positions. To the red button (Select
					Position 1), green button (Select Position 2) and yellow button
					(Select Position 3). If you press a button after saving, the set
					automatically moves to that saved angle.
				7.	If you additionally move the set from a saved position, the last
					position is saved.

For installation, refer to the Installation Manual provided.

For product installation and the installation and moving of the wall mount, make sure to consult a specialized installation company.

This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building materials, please contact your nearest dealer

English - 61