Samsung LE32S8, LE46S8, LE37S8, LE40S8, LE26S8 manual Using the Anti-Theft Kensington Lock, Optional

Page 57

Using the Anti-Theft Kensington Lock

The Kensington lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may dif- fer from the illustration depending on the manufacturer. Please refer to the manual provided with the Kensington lock for proper use.

1.Insert the locking device into the Kensington slot on the

LCD TV (Figure 1), and turn it in the locking direction

(Figure 2).

2.Connect the Kensington lock cable.

3.Fix the Kensington lock to a desk or a heavy stationary object.

Cable

Figure 2

Figure 1

<Optional>

The place of the Kensington Lock may be different depending on its model.

Troubleshooting: Before Contacting Service Personnel

No sound or picture

Check that the mains lead has been connected to a wall socket.

 

Check that you have pressed the POWER buttons on the front of the set.

 

Check the picture contrast and brightness settings.

 

Check the volume.

Normal picture but no

Check the volume.

sound

Check whether the MUTE button has been pressed on the remote control.

Check if "Internal Mute" is off

No picture or black and

Adjust the colour settings.

white picture

Check that the broadcast system selected is correct.

Sound and picture

Try to identify the electrical appliance that is affecting the set and move it

interference

further away.

 

Plug your set into a different mains socket.

 

 

Blurred or snowy picture,

Check the direction, location and connections of your aerial.

distorted sound

This interference is often due to the use of an indoor aerial.

Remote control malfunctions Replace the remote control batteries.

Clean the upper edge of the remote control (transmission window).

Check the battery terminals.

"Check signal cable." Check that the signal cable is firmly connected to the PC or video sources.

message is displayed. Check that the PC or video sources are turned on.

On PC mode, "Not Supported Check the maximum resolution and the frequency of the video adaptor. Mode." message is displayed. Compare these values with the data in the Display Modes.

The TFT LCD panel uses a panel consisting of sub pixels (3,133,440) which require sophisticated tech- nology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

English - 55

Image 57
Contents Country Customer Care Centre Web Site 0818 717 SamsungModel Serial No Still image may cause permanent damage to the TV screen Precautions When Displaying a Still ImageContents Symbol Installing the Wall Mount Kit Installing the StandList of Parts Cover-BottomPower Indicator Speakers PowerRemote Control Sensor Viewing the Control PanelViewing the Connection Panel Connecting Set-Top Box, VCR or DVDInsert the CI-Card in the direction marked on it Connecting an Aerial or Cable Television NetworkViewing the Remote Control Volume increase Volume decrease Temporary sound switch-offTeletext Functions Switching On and Off Installing Batteries in the Remote ControlPlacing Your Television in Standby Mode Mains lead is attached to the rear of your setPlug & Play If you want to reset this feature Storing Channels AutomaticallyMessage Start Plug & Play is displayed Refer to Storing Channels Manually Activating the Child Lock Setting the Channel ListsAssigning Channels Names Sorting the Stored ChannelsThen Move on the next letter Press the buttonLNA Low Noise Amplifier Fine Tuning Channel ReceptionTint function is available only in Hdmi and Component mode Adjusting the Custom PictureChanging the Picture Standard To select the desired picture effect, followChanging the Colour Tone Activating BacklightENTER/OK button Configuring Detailed Settings on the Picture Changing the Picture Size Selecting the Screen Mode Resetting the Picture Settings to the Factory DefaultsFreezing the Current Picture  Digital NR Off/Low/Medium/High/Auto Digital NR / Active Colour / DNIe Active Colour Off/On  DNIe Off/Demo/OnViewing the Picture In Picture PIP PIP SettingsChanging the Sound Standard Hdmi Black LevelSetting the TruSurround XT SRS TS XT Adjusting the Sound SettingsSelecting the Sound Mode Connecting HeadphonesAdjusting the Volume Automatically ScreenListening to the Sound of the Sub Picture Selecting the Internal MuteResetting the Sound Settings to the Factory Defaults Setting and Displaying the Current TimePress Switching the Television On and Off Automatically Setting the Sleep TimerPress the Menu button to display the on-screen menu Choosing Your LanguageSetting the Home Theater PC Setting the Blue Screen Mode / Selecting the MelodyBlue Screen  Blue Screen Off/OnUsing the Energy Saving Feature Editing the Input Source Names Selecting the SourceGuide, Channel Manager, etc. may not be displayed properly Previewing the DTV Menu SystemUpdating the Channel List Manually Updating the Channel List AutomaticallyPress the D.MENU button to display the DTV menu Press the or button to select Channel, then pressQVC Editing Your Favourite ChannelsMove PreviewDelete Displaying Programme Information Selecting Channel ListFull Guide Viewing the EPG Electronic Programme Guide InformationUsing the Scheduled List Setting the Default GuideYou can preset the default guide style EPG menu, you can display all channels or favourite channels Viewing All Channels and Favourite ChannelsSetting up the Parental Lock Adjusting the Menu TranslucencyPower Off, MUTE, 8, 2, 4, Power On You can set the translucency of the menuSetting the Subtitle Mode Setting the SubtitleSelecting the Audio Format You can activate and deactivate the subtitlesSelecting the Digital Text Select the time zone where locateSelecting the Time Zone Spain only Viewing Product InformationYou can get information about the signal status Checking the Signal Information Manual Upgrade Upgrading the SoftwareSelecting the CI Common Interface Menu Viewing Common InterfaceResetting Teletext Decoder PreferenceSelecting a Specific Teletext Displaying the Teletext InformationMix in order on the screen Press the TV/DTV button to exit from the Text displaySetting Up Your Remote Control Using Fastext to Select a TeletextVCR Remote Control CodesCable BOX Samsung SET-TOP BOX Setting up Your PC Software Based on Windows XP Display ModesHDMI/DVI Input Setting the PC Adjustment screen appears Wall-Mount Adjustment LE40S8, LE46S8 Sold separatelyUsing the Remote Control Buttons Position and moving Yellow buttons To the rememberedUsing the Anti-Theft Kensington Lock Troubleshooting Before Contacting Service PersonnelOptional Dimension WxDxH Technical and Environmental SpecificationsRISK OF ELECTRIC SHOCK DO NOT OPEN United Kingdom This page is intentionally Left blank