Other Features
Changing the spectrum
analyzer display
Press SPECTRUM.
Each time you press the button, the display changes cyclically as follows:
SPECTRUM 1 t SPECTRUM 2 t SPECTRUM 3 t PATTERN 1 t PATTERN 2 t PATTERN 3 t
PATTERN OFF
Adjusting the brightness
of the display
Press DIMMER.
Each time you press the button, the display changes cyclically as follows:
DIMMER 1 t DIMMER 2 t DIMMER 3
Enhancing the video game
sound
—Game Sync
You need to connect a video game player (see “Connecting a Video Game Player” on page 22).
Press GAME.
Tips
•In standby mode, the system automatically turns on.
•The previously selected GAME EQ is automatically selected.
•This operation cannot be performed in the Power Saving Mode.
Mixing the sound
—Game Mixing
You can mix the sound from the component connected to the GAME INPUT jacks with another function such as CD, tape, radio or an MD connected to this system.
1 Select source sound you want.
2 Press GAME MIXING.
Each time you press the button, the level of the game sound changes cyclically as follows:
MIXING LOW t MIXING MID t MIXING HIGH t MIXING OFF
Tips
•To record the mixed sound, press GAME MIXING after step 4 of “Recording Manually” on page 13 and then press REC PAUSE/START to start recording.
•The GAME MIXING indicator lights up while Game Mixing is activated and it will remain active while the power is on even if the function is changed.
Notes
•Game Mixing is cancelled when you press REC PAUSE/START.
•Game Mixing does not function during High Speed Dubbing and CD Synchro Recording.