Samsung LE40A436, LE40A LE4A Mini Remote Control, Installing Batteries in the Remote Control

Mini Remote Control

The Mini Remote Control is a simplified remote control that consists of the power, channel and volume buttons only.

1Television Standby button

N This button only works when you press it for longer than 1.5 seconds.

2< : Next channel

> : Previous channel

3+ : Volume increase

– : Volume decrease

4IrDA transmitter

N Use the Mini Remote Control so that this part faces the TV.

1

2

33

2

4

Installing Batteries in the Remote Control

Normal Remote Control

1.Lift the cover at the back of the remote control upward as shown in the figure.

2.Install two AAA size batteries.

N Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram inside the compartment.

3.Replace the cover.

N Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time.

N Using the remote control with the ON / OFF @light button set to on will reduce the battery usage time.

Mini Remote Control

1.Turn the battery cover counterclockwise to unlock it and then separate the battery cover.

2.Insert the corresponding 3V Lithium battery.

3.Place the battery cover into the remote control aligning it with the grooves and then turn the battery cover clockwise to lock the cover.

NIf the remote control doesn’t work, check the following:

1.Is the TV power on?

2.Are the plus and minus ends of the batteries reversed?

3.Are the batteries drained?

4.Is there a power outage or is the power cord unplugged?

5.Is there a special fluorescent light or neon sign nearby?

English -