Samsung LE27S7, LE37S7 manual Setting the PC, Adjusting the PC Screen Automatically Auto Adjustment

Page 39

Setting the PC

Coarse and Fine Tuning of the Image (Image Lock):

The purpose of picture quality adjustment is to remove or reduce picture noise.

If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen.

1.Preset: Press the SOURCE button to select PC mode.

2. Press the MENU button to display the menu.

Press the  or  button to select "Setup", then press the ENTER button.

3.Press the  or  button to select "PC", then press the ENTER button.

4.Press the ENTER button to select "Image Lock".

5.Press the  or  button to select "Coarse" or "Fine", then press the ENTER button.

6.Press the  or  button to adjust the screen quality. Press the ENTER button.

7.Press the EXIT button to exit.

Changing the Image Position (Position):

Adjust the PC’s screen positioning if it does not fit the TV screen.

1. Follow the "Coarse and Fine Tuning of the Image (Image Lock)" instructions number 1 to 3.

2. Press the  or  button to select "Position", then press the ENTER button.

3. Press the  or  button to adjusting the Vertical-Position. Press the  or  button to adjust the Horizontal-Position. Press the ENTER button.

4.Press the EXIT button to exit.

Adjusting the PC Screen Automatically (Auto Adjustment):

Auto adjustment allows the PC screen of set to self-adjust to the incoming PC video signal. The values of fine, coarse and position are adjusted automatically.

1. Follow the "Coarse and Fine Tuning of the Image (Image Lock)" instructions number 1 to 3.

2.Press the  or  button to select "Auto Adjustment", then press the ENTER button.

3.Press the EXIT button to exit.

Initializing the Image Settings (Image Reset):

You can replace all image settings with the factory default values.

1. Follow the "Coarse and Fine Tuning of the Image (Image Lock)" instructions number 1 to 3.

2.Press the  or  button to select "Image Reset", then press the ENTER button.

3.Press the EXIT button to exit.

English-37

Image 39

Contents LCD TV Still image may cause permanent damage to the TV screen Precautions When Displaying a Still ImageContents Installing the Stand Installing the Wall Mount KitList of Parts Viewing the Control Panel Press to decrease or increase the volumeViewing the Connection Panel Connecting an Aerial or Cable Television NetworkConnecting Audio Connecting HDMI/DVIConnecting Set-Top Box, VCR or DVD Connecting External A/V DevicesViewing the Remote Control Installing Batteries in the Remote ControlReplace the cover Plug & Play Switching On and OffPlacing Your Television in Standby Mode If you want to reset this featureStoring Channels Manually Storing Channels AutomaticallyActivating the Child Lock Setting the Channel ManagerYou can exchange the numbers of two channels, in order to Fine Tuning Channel ReceptionSorting the Stored Channels Assigning Channels NamesChanging the Colour Tone Adjusting the Custom PictureLNA Low Noise Amplifier Changing the Picture StandardFreezing the Current Picture Resetting the Picture Settings to the Factory DefaultsYou can return to the factory defaults picture settings Changing the Picture SizeViewing the Picture In Picture PIP DNIe Demo Digital Natural Image engineChanging the Sound Standard PIP SettingsAdjusting the Sound Settings Connecting HheadphonesListening to the Sound of the Sub Picture Setting the TruSurround XT SRS TsxtAdjusting the Volume Automatically Selecting the Internal MuteSwitching the Television On and Off Automatically Resetting the Sound Settings to the Factory DefaultsSetting and Displaying the Current Time Setting the Sleep TimerBlue Screen Using Game ModeSetting the Blue Screen Mode / Selecting the Melody Choosing Your LanguagePress the Menu button to display the on-screen menu Using the Energy Saving FeatureSelecting the Source Editing the Input Source NamesPress the D.MENU button to display the DTV menu Available in the Digital TV mode Press the D.MENU buttonPreviewing the DTV Menu System Updating the Channel List AutomaticallyUpdating the Channel List Manually Editing Your Favourite ChannelsNumeric button 0~9 Delete Selecting Channel ManagerMove PreviewFull Guide Displaying Programme InformationViewing the EPG Electronic Programme Guide Information Now & Next GuideUsing the Scheduled List Setting the Default GuideYou can preset the default guide style Viewing All Channels and Favourite Channels Setting the Preferred LanguagesYou can set the translucency of the menu Adjusting the Translucency LevelSetting up the Parental Lock Enter your new PIN code by using the numeric buttons 0~9You can activate and deactivate the subtitles Setting the SubtitleSetting the Digital Text Selecting the Preferred Language Subtitle or AudioChecking the Signal Information Viewing Product InformationUpgrading the Software Option Selecting the CI Common Interface Menu ResettingThis enables the user to select from the CAM-provided menu Viewing Common InterfacePress the TV/DTV button to exit from the Text display Teletext DecoderDisplaying the Teletext Information Press the TTX/MIX button againSelecting a Specific Teletext Using Fastext to Select a TeletextSetting Up Your Remote Control Setting Up the Remote to Operate Your VCRSetting Up the Remote to Operate Your Cable Box Setting Up the Remote to Operate Your STB Setting Up the Remote to Operate Your DVDVCR Remote Control CodesCable BOX Samsung SET-TOP BOX Display Modes Setting up Your PC Software Based on Windows XPAdjusting the PC Screen Automatically Auto Adjustment Setting the PCUsing the Anti-Theft Kensington Lock Troubleshooting Before Contacting Service Personnel Plug your set into a different mains socket Technical and Environmental Specifications RISK OF ELECTRIC SHOCK DO NOT OPEN United Kingdom This page is intentionally Left blank