Samsung LE19R8 manual Checking the Signal Information, Upgrading the Software

Page 44

Checking the Signal Information

You can get information about the signal status.

1.Press the D.MENU button to display the DTV menu.

2.Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.

3.Press the ▲ or ▼ button to select "System", then press the ENTER/OK button.

4.Press the ▲ or ▼ button to select "Signal Information", then press the ENTER/OK button.

Signal Information

Service: ?

 

 

Service ID: 0000

 

 

Multiplex: ? (TSID 0000, ONID 0000)

Network: ? (ID 0000)

 

Bit error level:

10

 

Signal Strength:

0

 

Move

Enter

Return

Return

 

 

5.Press the EXIT button to exit.

If the signal status is poor, the "No signal." message is displayed.

Upgrading the Software

To keep your product up-to-date with new Digital Television features then software upgrades are periodically broadcast as part of the normal Television signal.

It will automatically detect these signals and display the software upgrade banner. You are given the option to install the upgrade.

1.Press the D.MENU button to display the DTV menu.

2.Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.

3.Press the ▲ or ▼ button to select "System", then press the ENTER/OK button.

4.Press the ▲ or ▼ button to select "Software Upgrade", then press the ENTER/OK button.

5.Press the ▲ or ▼ button to select "Software Information",

"Manual Upgrade" or "Satandby Mode upgrade".

Press the ENTER/OK button.

Software Information

Press the ENTER/OK button, then the current software version is shown. To display the software version information, press the ENTER/OK button again.

To switch to an alternative version, press the red button.

Press the blue button to reset, activate the upgrade and restart.

Manual Upgrade

Press the ENTER/OK button to search for new software from the currently broadcasting channels.

Standby Mode Upgrade : On/Off

Press the ENTER/OK button. To continue software upgrade with master power on, Select On by pressing the ▲ or ▼ button.

45 minutes after entering standby mode, a manual upgrade is automatically conducted. Since the power of the unit is turned on internally, the screen may be on slightly for the LCD product. This phenomenon may continue for more than 1 hour until the software upgrade is completed.

6.Press the EXIT button to exit.

 

System

 

Product Information

Signal Information

 

Software Upgrade

 

Common Interface

 

 

Reset

 

Move

Enter

Return

Software Upgrade

Software Information

Manual Upgrade

Standby Mode upgrade : On

Move Enter Return

 

Software Upgrade

Software Information

Manual Upgrade

Standby Mode upgrade : On

Move

Enter

Return

Software Upgrade

Software Information

Manual Upgrade

Standby Mode upgrade : On

Move Enter Return

English - 42

Page 43 Page 45
Image 44
Page 43 Page 45
Contents LCD TV Model Serial NoPrecautions When Displaying a Still Image Still image may cause permanent damage to the TV screenContents Symbol List of Parts Power Cord Wall Mount kitDecoration Cover Cleaning Cloth Viewing the Control Panel Connecting Set-Top Box, VCR or DVD Viewing the Connection PanelConnecting Computer Insert the CI-Card in the direction marked on itTeletext Functions Viewing the Remote ControlTemporary sound switch-off Installing Batteries in the Remote Control Switching On and OffPlacing Your Television in Standby Mode Mains lead is attached to the rear of your setPlug & Play Plug & Play Start Plug & Play Enter ExitIf you want to reset this feature SetupStoring Channels Automatically Message Start Plug & Play is displayed. Refer toStoring Channels Manually Setting the Channel Lists Activating the Child LockSet the channels according to your preference Press the button to select lineSorting the Stored Channels Assigning Channels NamesPress ENTER/OK buttonFine Tuning Channel Reception Fine Tune ResetAdjusting the Custom Picture Changing the Picture StandardTo select the desired picture effect, follow PictureChanging the Colour Tone Activating BacklightConfiguring Detailed Settings on the Picture Changing the Picture Size SizeSelecting the Screen Mode Resetting the Picture Settings to the Factory Defaults 43 Sets the picture to 43 normal mode Freezing the Current PictureDigital NR / Active Colour / DNIe  Digital NR Off/Low/Medium/High/Auto Active Colour Off/On  DNIe Off/Demo/OnExt Viewing the Picture In Picture PIPMain picture Sub picture Component Analog TV broadcasts Hdmi Black Level Changing the Sound StandardEnter Low SoundTVSound Adjusting the Sound SettingsSetting the TruSurround XT SRS TS XT Adjusting the Volume Automatically Connecting HeadphonesSelecting the Sound Mode Selecting the Internal Mute Listening to the Sound of the Sub PictureResetting the Sound Settings to the Factory Defaults Setting and Displaying the Current TimeYou can select this option when the Game Mode is set to On Press the or button to select Time, then pressAuto Power Off Setting the Sleep TimerSwitching the Television On and Off Automatically Using Game Mode Mode Custom  EqualizerChoosing Your Language Press the Menu button to display the on-screen menuSetting the Light Effect Blue Screen / Melody / Energy Saving Blue Screen Off/On  Melody Off/Low/Medium/HighSelecting the Source Editing the Input Source NamesPreviewing the DTV Menu System Updating the Channel List Automatically Updating the Channel List ManuallyPress the D.MENU button to display the DTV menu Press the or button to select Channel, then pressEditing Your Favourite Channels No Channels Move EnterFive Abc1 Renumber depending on the country  Preview Delete Abc1 MoveSelecting Channel List Displaying Programme InformationViewing the EPG Electronic Programme Guide Information ThenYou can preset the default guide style Using the Scheduled ListSetting the Default Guide Adjusting the Menu Transparency Subtitle Mode NormalViewing All Channels and Favourite Channels You can set the transparency of the menuSetting up the Parental Lock Power Off, MUTE, 8, 2, 4, Power On Parental Lock  Change PINSetting the Subtitle Setting the Subtitle ModeSelecting the Audio Format You can activate and deactivate the subtitlesSelect the time zone where locate Selecting the Digital TextSelecting the Time Zone Spain only Viewing Product InformationChecking the Signal Information Upgrading the SoftwareCI Menu Viewing Common InterfaceSelecting the CI Common Interface Menu Resetting Selecting the Preferred Language Subtitle, Audio or TeletextPreference This menu consists of 6 sub-menusTeletext Feature Setting Up Your Remote Control Remote Control Codes VCRCable BOX Samsung SET-TOP BOX HDMI/DVI Input Setting up Your PC Software Based on Windows XPDisplay Modes Setting the PC Setting the Home Theatre PC How to Adjust the StandHow to Adjust the Angle of the TV Mode Custom EqualizerUsing the Decoration Covers Installing the Wall Mount KitInstalling Vesa compliant mounting devices Optional Using the Anti-Theft Kensington LockTroubleshooting Before Contacting Service Personnel Technical and Environmental Specifications RISK OF ELECTRIC SHOCK DO NOT OPEN United Kingdom
Top Page Image Contents